10G XFP ZR with dual CDR 70 km, λ1310 nm, LC-Duplex, Singlemode

Universal XFP Transceiver
Use FLEXBOX to configure to almost any vendor
For 10GBASE-ZR Ethernet links
Integrated Clock-Data-Recovery (CDR)
Supported Data Rates: 8.5 Gbit/s - 11.1 Gbit/s
Up to 70 km via Singlemode OS2
LC-Duplex Connector
Specs
  • 1310 nm
  • 70 km
  • 11.1 G
Protocols
  • 10G ETH
  • 10G FC
  • 8G FC
  • OTU2
  • STM-64
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Part number
X.1396.70:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor XFP
Connector / Polish LC-Duplex PC
Interface Singlemode
Compliance Code ZR
Distance 70 km
Temperature Range 0°C - 70°C
Bandwidth 8.5 Gbit/s - 11.1 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 3.5 W
CDR TX and RX
SGMII No
Inbuilt FEC No
Powerbudget (dB) 22 dB
Transmit min/max per lane 2 dBm / 5 dBm
Receiver min/max per lane -20 dBm / -8 dBm (overload) @10G
Wavelength TX (Typical) 1310 nm
Wavelength TX (Range) 1270 - 1355 nm
Wavelength RX (Typical) 1310 nm
Wavelength RX (Range) 1270 - 1600 nm
Laser DFB
Receiver Type APD
Modulation NRZ @10G
Extinction Ratio 3.5 dB
Supported Protocols 10G Ethernet, 10G FC, 8G Fibre Channel, OTU2, STM-64

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • ADVA # 13338 compatible
  • Allied Telesis # 13340 compatible
  • Avaya (ex. Nortel) # 13341 compatible
  • Cisco Systems XFP-10GZR-OC192LR compatible
  • Dell (ex. Force10) # 13346 compatible
  • Extreme # 13345 compatible
  • Extreme (ex. Enterasys) # 13344 compatible
  • H3C (ex. 3COM) # 13337 compatible
  • Hirschmann # 13347 compatible
  • Hitachi # 13348 compatible
  • HP H3C # 13349 compatible
  • Huawei # 13350 compatible
  • Infinera (ex. Transmode) # 13359 compatible
  • Juniper (ex BTI Systems) # 13342 compatible
  • Juniper XFP-10G-Z-OC192-LR2 compatible
  • Keysight (ex. Ixia) XSM1310 compatible
  • LevelOne # 13352 compatible
  • MikroTik # 13353 compatible
  • Moxa # 13354 compatible
  • MRV # 13355 compatible
  • NetOptics XFPKT-ER compatible
  • Nokia (ex. Alcatel-Lucent) # 13339 compatible
  • Nokia Siemens Networks # 13356 compatible
  • Packetlight SL104 compatible
  • Palo Alto Networks # 13357 compatible
  • Radware # 13358 compatible
  • Ribbon (ex. ECI) # 13343 compatible
  • Ribbon (ex. ECI) OTR64_AL5 compatible
Your vendor / compatibility is missing?

What customers say

After many years of using clumsy EEPROM programmers, soldering irons, hammers etc. to make SFP modules work properly, now FLEXBOX allows me to do the same thing in a fraction of time. I only hope my boss doesn't find out I have so much free time now!
Adil Demiri CTO, SGN d.o.o.

I wanted to take a moment to provide some feedback regarding the on-site programming capabilities of your FLEXOPTIX product. I must say that being able to program SFPs on-site according to our specific requirements has been an incredibly valuable feature for our network infrastructure. The convenience and efficiency it offers have exceeded our expectations.

One of the standout benefits we have experienced is the rapid deployment it enables. Being able to respond quickly to changing network needs without having to wait for orders from different vendors has significantly reduced our deployment time. This has improved our operational efficiency and allowed us to be more agile in meeting our organization's evolving demands.

Moreover, the cost savings we have achieved through on-site programming have been remarkable. By eliminating the need to order pre-configured SFPs from various vendors, we have saved on shipping costs, streamlined our inventory management, and bypassed vendor-specific pricing structures. This flexibility has positively impacted our budgeting and overall equipment expenses.

This is simply a brilliant idea and product! Thank you!

Michal Szarecki IT Engineer/ pmitsolutions.ie
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore. The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that. As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
Thomas Verschuren Technical Consultant, IP Visie Networking B.V.

You guys rock! I have had the opportunity to use the previous version of FLEXBOX with my previous company. I cannot believe the progress you have made just in a year. Battery pack? Mobile reconfiguration? I am truly feeling lucky to have met you guys at Cloudfest. I will be honoured to demonstrate your products to startups as great examples to contribute to tech sustainability.

Murat Aybars Founder / Ideatomy
More