10G XFP, 100 GHz Grid - C-Band DWDM ER with dual CDR 40 km / 14 dB, LC-Duplex
- DWDM 100 GHz
- 40 km
- 11.1 G
- Dual CDR
- 10G ETH
- 10G FC
- OTU2
- STM-64
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | XFP |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | DWDM |
Compliance Code | DWDM ER |
Distance | 40 km |
Temperature Range | 0°C - 70°C |
Bandwidth | 9.95 Gbit/s - 11.1 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
Power Consumption | 3.5 W |
---|---|
CDR | TX and RX |
Inbuilt FEC | No |
Powerbudget (dB) | 14 dB |
Transmit min/max per lane | -1 dBm / 4 dBm |
Receiver min/max per lane | -15 dBm / 0.5 dBm (overload) @10G |
Wavelength TX (Typical) | Channel 61 - 1528.77 nm |
Wavelength RX (Range) | 1270 - 1620 nm |
Laser | EML |
---|---|
Receiver Type | PIN |
Modulation | NRZ @10G |
Transmit and Dispersion Penalty | 2 dB |
Extinction Ratio | 8.2 dB |
Supported Protocols | 10G Ethernet, 10G FC, OTU2, STM-64 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADTRAN 1442987G8 compatible
- ADVA 1061701401-05 compatible
- ADVA 1061702201 compatible
- Alcatel-Lucent Ent. DWDM-40KM-C61 compatible
- Brocade / Ruckus 10G-XFP-ER compatible
- Ciena (ex. Nortel) NTK587EAE6 compatible
- Cisco Systems XFP-10GER compatible
- Dell (ex. Force10) GP-XFP-W61 compatible
- Extreme 10261 compatible
- Huawei DWDM-XFP10G-1528-77 compatible
- Huawei HXFP8441-610 compatible
- Infinera (ex. Transmode) TRX100031/961 compatible
- Juniper (ex BTI Systems) BP3AM4DL compatible
- Juniper XFP-10GE-ER compatible
- MRV XFP-DWLR08-61 compatible
- Net Insight NPA0059-1961 compatible
- Nokia (ex. Alcatel-Lucent) XFP-10G-DWDM-61 compatible
- Nokia Siemens Networks V50017-U776-K500 compatible
- Nortel / Juniper / NSN XFP-DWDM-14dB-C61 compatible
- Packetlight UL100S-CH61 compatible
- RAD XFP-5D-61 compatible
- Ribbon (ex. ECI) OTR10_AS compatible
What customers say
The flexbox has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the flexbox was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.
Looking forward to keep using the flexbox in the future! :)
The SFPs easily integrated with our existing network equipment, ensuring cross-vendor compatibility. The build quality is very good.
Connecting to the FLEXBOX with an Android phone took only a few seconds, and configuring the SFPs was a breeze. We really liked the ability to configure multiple SFPs at once. Shipping is incredibly fast. Support is friendly, technical and helpful.
When you unpack it, you immediately notice: A lot of time and love was invested in this great device. In just a few minutes everything is ready to go and the first transceiver can be configured. The app responds quickly and is well laid out, and the search function makes it easy to find the right configuration. The Flexbox is ideal for us because we use switches from many different manufacturers and can thus react flexibly to changes in our infrastructure at any time. Even on site, we can make adjustments at an instant thanks to the support for mobile devices for configuration.
We heard about FLEXOPTIX for the quality of its FLEXBOX and optics.
We were able to acquire a FLEXBOX to help out our customers. The quality of the product leaves us speechless. We are immediately going to change optics supplier to FLEXOPTIX. The quality is excellent.