10G XFP, 100 GHz Grid - C-Band DWDM ER with dual CDR Extended 40 km / 14 dB, LC-Duplex
- DWDM 100 GHz
- 40 km
- 11.1 G
- Dual CDR
- 10G ETH
- 10G FC
- OTU2
- STM-64
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | XFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | DWDM |
| Compliance Code | DWDM ER |
| Operating Temperature | Industrial |
| Modulation | NRZ |
| Distance | 40 km |
| Temperature Range | -20°C - 75°C |
| Bandwidth | 9.95 Gbit/s - 11.1 Gbit/s |
|---|---|
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 3.5 W |
| CDR | TX and RX |
| Inbuilt FEC | No |
| Powerbudget (dB) | 14 dB |
| Transmit min/max per lane | -1 dBm / 4 dBm |
| Receiver min/max per lane | -15 dBm / 0.5 dBm (overload) @10G |
| Wavelength TX (Typical) | Channel 61 - 1528.77 nm |
|---|---|
| Wavelength RX (Range) | 1270 - 1620 nm |
| Laser | EML |
| Receiver Type | PIN |
| Modulation | NRZ @10G |
| Transmit and Dispersion Penalty | 2 dB |
| Extinction Ratio | 8.2 dB |
| Supported Protocols | 10G Ethernet, 10G FC, OTU2, STM-64 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard (Default) P.1696.14.61.I compatible
- Cisco Systems XFP-10GER compatible
What customers say
The FLEXBOX allows us to use 100MBit/s to multi-gigabit transceivers in our product for a wide range of customer needs. We can not solve them without this magic box!
I had the chance to flash my first transceiver with the FLEXBOX and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the FLEXBOX. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my FLEXBOX for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.
The FLEXBOX was easy to set up and use, and the programmable transceivers worked seamlessly in several different brand devices. This will make our spares much easier to manage.
We use “FLEXBOX” and “FLEXOPTIX” for a few years now. Since then life is much easier. And even saved me sometimes in the middle of the night. Need a special vendor or type, plug it in, program, and done. Very… but very occasionally a compatibility is not present in the system. Just drop a e-mail to support with your needs to get an immediate response from “JIRA – the FLEXOPTIX robot” and your compatibility is added to your FLEXBOX within 24 hours. Just awesome!!