10G XFP ZR+ with dual CDR 100 km, λ1550 nm, LC-Duplex, Singlemode
- 1550 nm
- 100 km
- 11.3 G
- 10G ETH
- 10G FC
- OTU2
- STM-64
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | XFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | ZR+ |
| Distance | 100 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 9.95 Gbit/s - 11.3 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 3.5 W |
|---|---|
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 25 dB |
| Transmit min/max per lane | 0 dBm / 5 dBm |
| Receiver min/max per lane | -25 dBm / -7 dBm (overload) @10G |
| Wavelength TX (Typical) | 1550 nm |
| Wavelength TX (Range) | 1530 - 1565 nm |
|---|---|
| Wavelength RX (Typical) | 1550 nm |
| Wavelength RX (Range) | 1260 - 1600 nm |
| Laser | EML |
| Receiver Type | APD |
| Modulation | NRZ @10G |
| Extinction Ratio | 9 dB |
| Supported Protocols | 10G Ethernet, 10G FC, OTU2, STM-64 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADVA # 13381 compatible
- Allied Telesis # 13383 compatible
- Avaya (ex. Nortel) # 13384 compatible
- Brocade / Ruckus 10G-XFP-ZR compatible
- Ciena (ex. Nortel) NTTP81KA compatible
- Cisco Systems ONS-XC-10G-L2 compatible
- Dell (ex. Force10) # 13389 compatible
- Extreme (ex. Enterasys) # 13387 compatible
- Extreme 10125 compatible
- H3C (ex. 3COM) # 13380 compatible
- Hirschmann # 13390 compatible
- Hitachi # 13391 compatible
- HP H3C # 13392 compatible
- Huawei # 13393 compatible
- Infinera (ex. Transmode) # 13402 compatible
- Juniper (ex BTI Systems) # 13385 compatible
- Juniper EX-XFP-10GE-ZR compatible
- LevelOne # 13395 compatible
- MikroTik # 13396 compatible
- Moxa # 13397 compatible
- MRV # 13398 compatible
- NetOptics XFPKT-ER compatible
- Nokia (ex. Alcatel-Lucent) # 13382 compatible
- Nokia Siemens Networks # 13399 compatible
- Nortel / Juniper / NSN XFP-ZR-25dB compatible
- Packetlight SL104 compatible
- Palo Alto Networks # 13400 compatible
- Radware # 13401 compatible
- Ribbon (ex. ECI) # 13386 compatible
- Transition Networks TN-XFP-LR10 compatible
What customers say
We are realy happy with the FLEXBOX, programming FLEXOPTIX universal transceivers works like a charm.
Just insert, detect, select and start programming, now we are able to support hundreds off vendors with just a few standard SFP modules.
Amazing smart solution!
When you unpack it, you immediately notice: A lot of time and love was invested in this great device. In just a few minutes everything is ready to go and the first transceiver can be configured. The app responds quickly and is well laid out, and the search function makes it easy to find the right configuration. The Flexbox is ideal for us because we use switches from many different manufacturers and can thus react flexibly to changes in our infrastructure at any time. Even on site, we can make adjustments at an instant thanks to the support for mobile devices for configuration.