10G XFP CWDM ER with dual CDR ~30 km / 14 dB, 1270 nm - 1610 nm, LC-Duplex
- CWDM
- ~30 km / 14 dB
- 11.1 G
- Dual CDR
- 10G ETH
- 10G FC
- 8G FC
- OTU2
- STM-64
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | XFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | CWDM |
| Compliance Code | CWDM ER |
| Operating Temperature | Standard |
| Modulation | NRZ |
| Distance | 40 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 8.5 Gbit/s - 11.1 Gbit/s |
|---|---|
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 3.5 W |
| CDR | TX and RX |
| Inbuilt FEC | No |
| Powerbudget (dB) | 14 dB |
| Transmit min/max per lane | -1 dBm / 4 dBm |
| Receiver min/max per lane | -15 dBm / 0.5 dBm (overload) @10G |
| Wavelength TX (Typical) | Channel R - 1610 nm |
|---|---|
| Wavelength RX (Range) | 1260 - 1620 nm |
| Laser | EML |
| Receiver Type | PIN |
| Modulation | NRZ @10G |
| Transmit and Dispersion Penalty | 2.5 dB |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 10G Ethernet, 10G FC, 8G Fibre Channel, OTU2, STM-64 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- MSA Standard (8G) compatible
- ADVA 1061701698 compatible
- ADVA 1061702298 (8G) compatible
- Avaya (ex. Nortel) AA1403003-E5 compatible
- Brocade / Ruckus 10G-XFP-ER compatible
- Ciena (ex. Nortel) NTTP84BA compatible
- Ciena (ex. Nortel) NTTP84HH compatible
- Cisco Systems ONS-XC-10G-1610 compatible
- Cisco Systems XFP-10GER-192IR+ compatible
- Dell (ex. Force10) GP-XFP-1E compatible
- Ericsson RDH102140/08 compatible
- Extreme 10124 compatible
- Hirschmann M-XFP-ER/LC compatible
- Huawei XFP-STM64-LH40-SM1610 compatible
- Infinera (ex. Transmode) TRX100071/08 compatible
- Infinera (ex. Transmode) TRX100079/08 compatible
- Juniper (ex BTI Systems) BP3AM4CL-01 compatible
- Juniper XFP-10GE-ER compatible
- MRV XFP-10GCWER-61 compatible
- Nevion XFP-TR10-C1610-ER compatible
- Nokia (ex. Alcatel-Lucent) 3HE00876AA compatible
- Nortel / Juniper / NSN XFP-CWDM-14dB-1610 compatible
- Packetlight UL100CS-40-CH1610 compatible
- Ribbon (ex. ECI) OTC10_PS61 compatible
- Telco Systems BTI-10GER-61-XFP compatible
- Zyxel XFP-ER compatible
What customers say
As an IT company specializing in the installation of network equipment, we've found FLEXBOX by FLEXOPTIX to be an invaluable tool. Its versatility across various transceivers and user-friendly interface has made our job easier and more efficient.
One of the most impressive aspects of FLEXBOX is the reusability of the transceivers. This feature allows us to reconfigure and reuse the transceivers as needed, offering unprecedented flexibility and cost savings.
The performance is robust, and FLEXBOX has not only saved us time but also provided a cost-effective solution without sacrificing quality.
In summary, FLEXBOX by FLEXOPTIX is a must-have tool for anyone in the networking field. We wholeheartedly recommend it and give it a five-star rating.
I personally did not know FLEXOPTIX yet, but since I got in contact with it the first time, I do not want to miss it anymore. Very good product. I like the ability to program them to vendor specific SFPs which are recognized as they would be original ones. If the hardware behind changes I can simply change the SFPs to new vendor specific ones.
Thank you for such a great product.
We are using FLEXOPTIX industrial grade transceivers in our control systems for power electronics and converters. The FLEXBOX is an invaluable tool, making it super easy and quick to configure transceivers. Even larger numbers can be configured easily with the batch configure option, just plug them in one after the other and the rest happens automatically. The power meter, source control and OTDR features are helpful for lab testing or during commissioning. Thanks, FLEXOPTIX for providing universal transceivers of a high quality at decent prices! Your lightning-fast order processing and shipping speed is also impressive.
The flashing is very quick and you can configure it to flash multiple devices in a row. Definitely well worth it.