10G XFP CWDM LR with dual CDR ~10 km / 10 dB, 1270 nm - 1610 nm, LC-Duplex
- CWDM
- ~10 km / 10 dB
- 11.1 G
- Dual CDR
- 10G ETH
- 10G FC
- 8G FC
- OTU2
- STM-64
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | XFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | CWDM |
| Compliance Code | CWDM LR |
| Operating Temperature | Standard |
| Modulation | NRZ |
| Distance | 10 km |
| Temperature Range | -5°C - 70°C |
| Bandwidth | 8.5 Gbit/s - 11.1 Gbit/s |
|---|---|
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 3.5 W |
| CDR | TX and RX |
| Inbuilt FEC | No |
| Powerbudget (dB) | 10 dB |
| Transmit min/max per lane | -5 dBm / 0 dBm |
| Receiver min/max per lane | -15 dBm / 0.5 dBm (overload) @10G |
| Wavelength TX (Typical) | Channel R - 1610 nm |
|---|---|
| Wavelength RX (Range) | 1260 - 1620 nm |
| Laser | DFB |
| Receiver Type | PIN |
| Modulation | NRZ @10G |
| Transmit and Dispersion Penalty | 2 dB |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 10G Ethernet, 10G FC, 8G Fibre Channel, OTU2, STM-64 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- MSA Standard (8G) compatible
- ADTRAN 1442971G1 compatible
- Alcatel-Lucent Ent. 10G-XFP-LR compatible
- Allied Telesis AT-XPLR compatible
- Arris 718887 compatible
- Avaya (ex. Nortel) AA1403001-E5 compatible
- Brocade / Ruckus 10G-XFP-LR compatible
- Ciena (ex. Nortel) NTTP84HH compatible
- Cisco Systems XFP-10GLR-OC192SR compatible
- Dell (ex. Force10) GP-XFP-1L compatible
- Ericsson RDH102140/01 compatible
- Extreme (ex. Enterasys) 10GBASE-LR-XFP compatible
- Extreme 10122 compatible
- H3C (ex. 3COM) 3CXFP92 compatible
- Hirschmann M-XFP-LR/LC compatible
- Hitachi 10GBASE-LR compatible
- HP H3C JD108B compatible
- Huawei XFP-STM64-LH40-SM1610 compatible
- Juniper (ex BTI Systems) BP3AM4MS compatible
- Juniper XFP-10GE-LR compatible
- MRV XFP-10GCWER-61 compatible
- Net Insight NPA0073-1610 compatible
- Nortel / Juniper / NSN XFP-CWDM-10dB-1610 compatible
- Ribbon (ex. ECI) OTR64_PI3 compatible
- Transition Networks TN-XFP-LR1-C61 compatible
- Zyxel XFP-LR compatible
What customers say
With the FLEXBOX we’re able to use our Transceivers universally in all kind of equipment and reduce the stock keeping significantly. Just awesome!
The FLEXBOX has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the FLEXBOX was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.
Looking forward to keep using the FLEXBOX in the future! :)
I have received my orders from them in blistering speed. Happy to the nth degree.
FLEXOPTIX have saved us from the misery and disappointment of searching in vain through our box of old, single-vendor transceivers when we need to connect up a device, only to find we don’t have a compatible module. Having the FLEXBOX and programmable transceivers in our toolbox means we’ve always got the right transceiver for any device. The icing on the cake is the mobility pack which allows you to program any transceivers, anywhere, any time, with just a mobile phone and the FLEXBOX . Absolutely brilliant and couldn't ask for more.