2.67G SFP STM-16 Industrial 80 km, λ1550 nm, DDM, LC-Duplex, Singlemode
SFP
STM-16
Universal SONET / SDH SFP Transceiver
Use FLEXBOX to configure to almost any vendor
Capable of operating in SDH / SONET networks
Supported Data Rates: 125 Mbit/s - 2.67 Gbit/s
Up to 80 km via Singlemode OS2
LC-Duplex Connector
Operating Temperature from -40°C to 85°C, Digital Diagnocstic Monitoring (DDM)
Specs
- 1550 nm
- 80 km
- 2.67 G
- Industrial
Protocols
- 100M ETH
- 1G ETH
- 1G FC
- 2G FC
- STM-1
- STM-16
- STM-4
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | STM-16 |
| Distance | 80 km |
| Temperature Range | -40°C - 85°C |
| Bandwidth | 125 Mbit/s - 2.67 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 1 W |
| CDR | none |
|---|---|
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 26 dB |
| Transmit min/max per lane | -2 dBm / 3 dBm |
| Receiver min/max per lane | -28 dBm / -9 dBm (overload) @2G |
| Wavelength TX (Typical) | 1550 nm |
| Wavelength TX (Range) | 1500 - 1600 nm |
| Wavelength RX (Typical) | 1550 nm |
| Wavelength RX (Range) | 1260 - 1600 nm |
|---|---|
| Laser | DFB |
| Receiver Type | APD |
| Modulation | NRZ @2G |
| Transmit and Dispersion Penalty | 1 dB |
| Extinction Ratio | 8.2 dB |
| Supported Protocols | 1G Fibre Channel, 2G Fibre Channel, Fast Ethernet, Gigabit Ethernet, STM-1, STM-16, STM-4 |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADTRAN 1184560P5 compatible
- Ciena (ex. Nortel) NTTP05FD compatible
- Cisco Systems ONS-SI-2G-L2 compatible
- Cisco Systems SFP-OC48-LR2 compatible
- Cyan 280-0012-00 compatible
- Cyan SDH compatible
- FiberPlex SFP-SC48XC-5555-F compatible
- Huawei eSFP-1550nm-L-16.2 compatible
- Infinera (ex. Transmode) TRX100054 compatible
- Infinera TOM-2.5GMR-LR2 compatible
- Juniper SFP-1OC48-LR compatible
- Marconi SU68AD compatible
- MRV SFP-MR27D-LR2-R compatible
- Net Insight NPA0022-VL21 compatible
- Nokia (ex. Alcatel-Lucent) 1AB196370009 compatible
- Nokia (ex. Alcatel-Lucent) 1AB376370004 compatible
- Nokia Siemens Networks V50017-U342-K500 compatible
Your vendor / compatibility is missing?
What customers say
After many years of using clumsy EEPROM programmers, soldering irons, hammers etc. to make SFP modules work properly, now FLEXBOX allows me to do the same thing in a fraction of time. I only hope my boss doesn't find out I have so much free time now!
Adil Demiri
CTO, SGN d.o.o.
Definitely, FLEXOPTIX will be my optics supplier from today. The ability to compatibilize optics across multiple vendors is going to save us from many headaches. The FLEXBOX is a must for any company using optical network equipment.
Miguel Bérniz
Chief Technical Officer, GibFibre Ltd
Now that I’m done configuring my equipment, I use FLEXBOX to impress associates.
I’m an IT Hero just for the savings, not to mention the FLEXibility to stock one type for each adapter.
Keep up the good work!
Nikos Papandreou
Dipl. Civil Engineer acting as IT Admin/SQL Dev, Geitonas School SA
We heard about FLEXOPTIX for the quality of its FLEXBOX and optics.
We were able to acquire a FLEXBOX to help out our customers. The quality of the product leaves us speechless. We are immediately going to change optics supplier to FLEXOPTIX. The quality is excellent.
Axel Hauguel
CEO / Dyjix