STM-4 SFP CWDM ~140 km / 39 dB, 1270 nm - 1610 nm, DDM, LC-Duplex
- CWDM
- ~140 km / 39 dB
- 622 M
- 100M ETH
- STM-1
- STM-4
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | CWDM |
| Compliance Code | CWDM STM-4 |
| Distance | 140 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 100 Mbit/s - 622 Mbit/s |
| Digital Diagnostic Management (DDM) | Internally Calibrated |
| Power Consumption | 1 W |
|---|---|
| CDR | none |
| Inbuilt FEC | No |
| Powerbudget (dB) | 39 dB |
| Transmit min/max per lane | 2 dBm / 7 dBm |
| Receiver min/max per lane | -37 dBm / -10 dBm (overload) @100M - 800M |
| Wavelength TX (Typical) | Channel R - 1610 nm |
| Wavelength RX (Range) | 1100 - 1650 nm |
| Laser | DFB |
|---|---|
| Receiver Type | APD |
| Modulation | NRZ @100M - 800M |
| Transmit and Dispersion Penalty | 1 dB |
| Extinction Ratio | 8.2 dB |
| Supported Protocols | Fast Ethernet, STM-1, STM-4 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Brocade / Ruckus E1MG-100FX-LR-OM compatible
- Ribbon (ex. ECI) OTR1_S3 compatible
- Ribbon (ex. ECI) OTR4_S3 compatible
What customers say
Working with a lot of different vendor and devices, it is always a problem to find the compatible transceiver from different distributors and especially to ensure that it is really compatible. I have found FLEXOPTIX, and the FLEXBOX and I must say that this is awesome! We can now simply buy generic transceivers and program them with the FLEXBOX and the FLEXOPTIX App. The application is fantastic and very easy to use! This makes us save a lot of time and no more concern about the compatibility.
When you unpack it, you immediately notice: A lot of time and love was invested in this great device. In just a few minutes everything is ready to go and the first transceiver can be configured. The app responds quickly and is well laid out, and the search function makes it easy to find the right configuration. The Flexbox is ideal for us because we use switches from many different manufacturers and can thus react flexibly to changes in our infrastructure at any time. Even on site, we can make adjustments at an instant thanks to the support for mobile devices for configuration.