2x 1G CSFP BiDi EX Industrial 40 km, 2x ᵀˣ1490 / 2x ᴿˣ1310 nm, DDM, LC-Simplex, Singlemode
- int. Mux
- 40 km
- 2x 1.25 G
- Industrial
- 100M ETH
- 1G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | CSFP |
|---|---|
| Connector / Polish | 2x LC-Simplex UPC |
| Interface | Singlemode BiDi |
| Compliance Code | 2x BiDi EX |
| Operating Temperature | Industrial |
| Distance | 40 km |
| Temperature Range | -40°C - 85°C |
| Lane Count | 2x (Tx/Rx) |
| Bandwidth | 2x 125 Mbit/s - 2x 1.25 Gbit/s |
| Bandwidth Per Lane | 125 Mbit/s - 1.25 Gbit/s |
|---|---|
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 1.5 W |
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 19 dB |
| Transmit min/max per lane | -5 dBm / 0 dBm |
| Receiver min/max per lane | -24 dBm / -3 dBm (overload) @1G |
| Wavelength TX (Typical) | 2x 1490 nm |
|---|---|
| Wavelength TX (Range) | 1480 - 1500 nm |
| Wavelength RX (Typical) | 2x 1310 nm |
| Laser | DFB |
| Receiver Type | PIN |
| Modulation | NRZ @1G |
| Transmit and Dispersion Penalty | -3 dB |
| Extinction Ratio | 6 dB |
| Supported Protocols | Fast Ethernet, Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Cisco Systems GLC-2BX-D compatible
What customers say
We heard about FLEXOPTIX for the quality of its FLEXBOX and optics.
We were able to acquire a FLEXBOX to help out our customers. The quality of the product leaves us speechless. We are immediately going to change optics supplier to FLEXOPTIX. The quality is excellent.
Ordering and using FLEXOPTIX transceivers was far quicker than even getting a quote from traditional vendors.
Using the FLEXBOX is super easy and fast - 5 minutes to get transceivers ready including unboxing and enjoying packaged marshmallows.
The FLEXBOX has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!
We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.
The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.
The FLEXOPTIX universal transceivers are very easy to configure and we will be ordering these in the future.
It's just a genius device. So easy to use and simple! I would recommend it to every network engineer. Plug-in the module, program and its ready for deployment!