2x 1G CSFP BiDi EX Industrial 40 km, 2x ᵀˣ1310 / 2x ᴿˣ1490 nm, DDM, LC-Simplex, Singlemode
- int. Mux
- 40 km
- 2x 1.25 G
- Industrial
- 100M ETH
- 1G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | CSFP |
|---|---|
| Connector / Polish | 2x LC-Simplex UPC |
| Interface | Singlemode BiDi |
| Compliance Code | 2x BiDi EX |
| Operating Temperature | Industrial |
| Modulation | NRZ |
| Distance | 40 km |
| Temperature Range | -40°C - 85°C |
| Lane Count | 2x (Tx/Rx) |
| Bandwidth | 2x 125 Mbit/s - 2x 1.25 Gbit/s |
| Bandwidth Per Lane | 125 Mbit/s - 1.25 Gbit/s |
|---|---|
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 1.5 W |
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 21 dB |
| Transmit min/max per lane | -3 dBm / 2 dBm |
| Receiver min/max per lane | -24 dBm / -3 dBm (overload) @1G |
| Wavelength TX (Typical) | 2x 1310 nm |
| Wavelength TX (Range) | 1290 - 1330 nm |
|---|---|
| Wavelength RX (Typical) | 2x 1490 nm |
| Laser | DFB |
| Receiver Type | PIN |
| Modulation | NRZ @1G |
| Transmit and Dispersion Penalty | 1 dB |
| Extinction Ratio | 6 dB |
| Supported Protocols | Fast Ethernet, Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Cisco Systems GLC-2BX-D compatible
What customers say
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore.
The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that.
As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
The FLEXBOX allows us to use 100MBit/s to multi-gigabit transceivers in our product for a wide range of customer needs. We can not solve them without this magic box!
The FLEXBOX is really a great tool. It allows me to quickly re-configure transceivers. Nice additional feature is the "Power Meter & Source" tool. It allows, without additional hardware, a quick check of optical transceivers, fiber cables, fiber connections etc.
As an IT company specializing in the installation of network equipment, we've found FLEXBOX by FLEXOPTIX to be an invaluable tool. Its versatility across various transceivers and user-friendly interface has made our job easier and more efficient.
One of the most impressive aspects of FLEXBOX is the reusability of the transceivers. This feature allows us to reconfigure and reuse the transceivers as needed, offering unprecedented flexibility and cost savings.
The performance is robust, and FLEXBOX has not only saved us time but also provided a cost-effective solution without sacrificing quality.
In summary, FLEXBOX by FLEXOPTIX is a must-have tool for anyone in the networking field. We wholeheartedly recommend it and give it a five-star rating.