100M SFP BiDi LX Industrial 20 km, ᵀˣ1550 / ᴿˣ1310 nm, DDM, LC-Simplex, Singlemode
- 1550 nm
- 20 km
- 155 M
- Industrial
- 100M ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Simplex UPC |
| Interface | Singlemode BiDi |
| Compliance Code | BiDi LX |
| Distance | 20 km |
| Temperature Range | -40°C - 85°C |
| Bandwidth | 125 Mbit/s - 155 Mbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 1 W |
|---|---|
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 14 dB |
| Transmit min/max per lane | -15 dBm / -8 dBm |
| Receiver min/max per lane | -29 dBm / -8 dBm (overload) @100M - 800M |
| Wavelength TX (Typical) | 1550 nm |
| Wavelength TX (Range) | 1500 - 1600 nm |
|---|---|
| Wavelength RX (Typical) | 1310 nm |
| Wavelength RX (Range) | 1260 - 1360 nm |
| Laser | FP |
| Receiver Type | PIN |
| Modulation | NRZ @100M - 800M |
| Extinction Ratio | 8.2 dB |
| Supported Protocols | Fast Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADTRAN 1442702PG2 compatible
- Cisco Systems GLC-FE-100BX-D compatible
- Hirschmann SFP-FAST-BB SM/LC EEC compatible
- Huawei SFP-FE-LX-SM1550-BIDI compatible
- Korenix SFP100SM20B15D-W compatible
- Marconi SU66AD compatible
- MRV SFP-FD-BX53TH compatible
- Nortel / Juniper / NSN SFP-100-BI55 compatible
- Planet MFB-TFB20 compatible
- Westermo 1100-0146 compatible
What customers say
The flashing is very quick and you can configure it to flash multiple devices in a row. Definitely well worth it.
The FLEXBOX is really a great tool. It allows me to quickly re-configure transceivers. Nice additional feature is the "Power Meter & Source" tool. It allows, without additional hardware, a quick check of optical transceivers, fiber cables, fiber connections etc.
With the FLEXBOX we’re able to use our Transceivers universally in all kind of equipment and reduce the stock keeping significantly. Just awesome!
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore.
The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that.
As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!