1G SFP Wideband BiDi LX Industrial 10 km, ᵀˣ1310 / ᴿˣ1460-1580 nm, DDM, LC-Simplex, Singlemode
- 1310 nm
- 10 km
- 1.25 G
- Industrial
- 100M ETH
- 1G ETH
- 1G FC
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Simplex UPC |
| Interface | Singlemode BiDi |
| Compliance Code | BiDi LX |
| Operating Temperature | Industrial |
| Distance | 10 km |
| Temperature Range | -40°C - 85°C |
| Bandwidth | 125 Mbit/s - 1.25 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 1 W |
|---|---|
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 12.5 dB |
| Transmit min/max per lane | -9.5 dBm / -3 dBm |
| Receiver min/max per lane | -22 dBm / -3 dBm (overload) @1G |
| Wavelength TX (Typical) | 1310 nm |
| Wavelength TX (Range) | 1270 - 1350 nm |
| Wavelength RX (Typical) | 1550 nm |
|---|---|
| Wavelength RX (Range) | 1460 - 1580 nm |
| Laser | FP |
| Receiver Type | PIN |
| Modulation | NRZ @1G |
| Extinction Ratio | 9 dB |
| Supported Protocols | 1G Fibre Channel, Fast Ethernet, Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Alcatel-Lucent Ent. SFP-GIG-BX-U compatible
- Aruba Networks(ex. HP Network) J4859C compatible
- Cisco Systems GLC-BX-U compatible
- Juniper EX-SFP-GE10KT13R15 compatible
- Juniper SFP-GE10KT13R15 compatible
- Nokia (ex. Alcatel-Lucent) 1AB350870001 compatible
- Nokia (ex. Alcatel-Lucent) 3FE25772AA compatible
What customers say
Definitely, FLEXOPTIX will be my optics supplier from today. The ability to compatibilize optics across multiple vendors is going to save us from many headaches. The FLEXBOX is a must for any company using optical network equipment.
FLEXBOX allows us to reduce the amount of spare transceivers we keep for our diverse hardware systems, thereby keeping overall cost low.
The FLEXBOX has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!
We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.
The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.
The FLEXOPTIX universal transceivers are very easy to configure and we will be ordering these in the future.
What a great product! FLEXBOX is an incredible help to our organisation that has a zoo of vendors and manufacturers in our data center. It is super easy to use and we can rapidly get a transceiver ready for any of our hardware. Q: How to improve the experience of setting up transceivers in a multivendor environment? A: FLEXBOX.