4G Fibre Channel SFP, 100 GHz Grid - C-Band DWDM 40 km / 18 dB, DDM, LC-Duplex

Universal Fibre Channel SFP Transceiver - 100 GHz Grid - C-Band
Use FLEXBOX to configure to almost any vendor
DWDM for multiple applications over one duplex fiber
Fibre Channel (FC) support for storage area network (SAN) interconnect
Supported Data Rates: 155 Mbit/s - 4.25 Gbit/s
Powerbudget of 18 dB for up to 40 km using an OS2 ITU-T G.652 fiber
Digital Diagnostic Monitoring (DDM)
Specs
  • DWDM 100 GHz
  • 40 km
  • 4.25 G
Protocols
  • 1G ETH
  • 1G FC
  • 2G FC
  • 4G FC
  • STM-1
  • STM-16
  • STM-4
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Part number
S.1648.18.yyD

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor SFP
Connector / Polish LC-Duplex PC
Interface DWDM
Compliance Code 4G FC LW
Operating Temperature Standard
Modulation NRZ
Distance 40 km
Temperature Range 0°C - 70°C
Bandwidth 155 Mbit/s - 4.25 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 1.5 W
CDR none
Inbuilt FEC No
Powerbudget (dB) 18 dB
Transmit min/max per lane 0 dBm / 5 dBm
Receiver min/max per lane -18 dBm / -3 dBm (overload) @4G
Wavelength TX (Typical) Channel 61 - 1528.77 nm
Wavelength RX (Range) 1528 - 1664 nm
Laser DFB
Receiver Type PIN
Modulation NRZ @4G
Transmit and Dispersion Penalty 1 dB
Extinction Ratio 4.5 dB
Supported Protocols 1G Fibre Channel, 2G Fibre Channel, 4G Fibre Channel, Gigabit Ethernet, STM-1, STM-16, STM-4

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • Brocade XBR-000146 compatible
  • Cisco Systems DS-SFP-FC4G-LW compatible
  • HP Storage (B-Series) AN211A compatible
  • Juniper SFP-1GE-LH compatible
  • Packetlight UL-DWDM-4G-FC-L-CH61 compatible
Your vendor / compatibility is missing?

What customers say

Before we knew FLEXOPTIX, we always stocked various types of transceivers from different brands. Now, several years later, we have completely switched to FLEXOPTIX's universal transceivers since we can simply brand these ourselves using the FLEXBOX. Along with their broad product range and very fast shipping, they are an awesome company to deal with!

Jeffrey Bosma Sr. System & Network Engineer / XS News

Using FLEXBOX and FLEXOPTIX transceivers mean for us Flexibility. We don’t use so much transceivers but we work with different brands each day.
With a small amount in stock we can configure them with the right specifications for each use. Assuring it will perfectly fit the requirements of our equipments and costs are also reduced considerably.
Setting up either the FLEXBOX and a transceiver on a computer or through the mobile app is just easy as 1,2,3. It tooks us less than 15 minutes between unboxing and using a transceiver.
We really appreciate the mobile option so we can have the FLEXBOX in one hand, a transceiver in the other one and the phone with the app in the pocket for programming on the field.
Thanks FLEXOPTIX for this really useful tool and for extending supported vendors in the future.

Christophe Mulkers CEO/CTO / Oufti Connections

Ordering and using FLEXOPTIX transceivers was far quicker than even getting a quote from traditional vendors. 
Using the FLEXBOX is super easy and fast - 5 minutes to get transceivers ready including unboxing and enjoying packaged marshmallows.

Bronislav Robenek Network Architect / Cloud4com

Formerly a System & Network Engineer at the service of French Academic and Research Network and currently developing my own IT services business, I have been a strong advocate of FLEXOPTIX "one-SFP-fits-all" approach since 2015!
Having purchased close to 1500 optics over the last few years for different kinds of projects (Metropolitan & Campus Networks, Datacenter, Nexans FTTO projects), I have always been completely satisfied with FLEXOPTIX products.
I have had the opportunity to test several competing solutions and for me "FLEXBOX" is by far the most advanced in terms of functionality, ease of use and compatibility.
Beyond the flawless technical aspects, the many human qualities of the different people I have had the opportunity to exchange with are a priceless advantage: sympathy, reactivity, impressive know-how, infallible logistics and after-sales services, FLEXOPTIX is a company you enjoy working with and you can trust one hundred percent.
Thanks a lot guys!

Francis Monestier System & Network Engineer / JigWan
More