4G Fibre Channel SFP, 100 GHz Grid - C-Band DWDM 80 km / 26 dB, DDM, LC-Duplex
- DWDM 100 GHz
- 80 km
- 4.25 G
- 1G ETH
- 1G FC
- 2G FC
- 4G FC
- STM-1
- STM-16
- STM-4
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | DWDM |
| Compliance Code | 4G FC LW |
| Operating Temperature | Standard |
| Modulation | NRZ |
| Distance | 80 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 155 Mbit/s - 4.25 Gbit/s |
|---|---|
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 1 W |
| CDR | none |
| Inbuilt FEC | No |
| Powerbudget (dB) | 26 dB |
| Transmit min/max per lane | 2 dBm / 7 dBm |
| Receiver min/max per lane | -24 dBm / -9 dBm (overload) @4G |
| Wavelength TX (Typical) | Channel 61 - 1528.77 nm |
|---|---|
| Wavelength RX (Range) | 1528 - 1664 nm |
| Laser | DFB |
| Receiver Type | APD |
| Modulation | NRZ @4G |
| Transmit and Dispersion Penalty | 1 dB |
| Extinction Ratio | 8.2 dB |
| Supported Protocols | 1G Fibre Channel, 2G Fibre Channel, 4G Fibre Channel, Gigabit Ethernet, STM-1, STM-16, STM-4 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADVA 0061001201 compatible
- ADVA 0061702401 compatible
- Brocade XBR-000146 compatible
- Ciena (ex. Nortel) NTK586AAE5 compatible
- Cisco Systems DS-SFP-FC4G-LW compatible
- HP Storage (B-Series) AN211A compatible
- Infinera (ex. Transmode) TRX100055/961 compatible
- Juniper (ex BTI Systems) BP3AM2DL compatible
- MRV SFPFC4DW08-61 compatible
- Packetlight UL-DWD-4G-FC-L-CH61 compatible
What customers say
As a network engineer responsible for programming universal transceivers, I can confidently say that the FLEXBOX is a true game-changer in the field. Its unparalleled capabilities and user-friendly interface makes the process effortless and highly efficient.
One of the standout features of the FLEXBOX is its ability to support a wide range of transceiver types and brands. Whether you're dealing with SFP, SFP+, QSFP, the FLEXBOX has got you covered.
We will now be able to source all our SFPs from a single vendor without having to worry about the configuration. That translates to peace of mind and huge flexibility. Well done guys!
The FLEXBOX was easy to set up and use, and the programmable transceivers worked seamlessly in several different brand devices. This will make our spares much easier to manage.
For years we struggled with hundreds of transceivers from different vendors but this is finally over!
With FLEXBOX we can easily reconfigure our transceivers which in the end saves a lot of time and money.