2.67G STM-16 SFP, 100 GHz Grid - C-Band DWDM 120 km / 33 dB, DDM, LC-Duplex
- DWDM 100 GHz
- 120 km
- 2.67 G
- 100M ETH
- 1G ETH
- 1G FC
- 2G FC
- CPRI
- STM-1
- STM-16
- STM-4
-
Matching Products
-
Matching Products
Specification
Form Factor | SFP |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | DWDM |
Compliance Code | STM-16 |
Distance | 120 km |
Temperature Range | 0°C - 70°C |
Bandwidth | 125 Mbit/s - 2.67 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
Power Consumption | 1.5 W |
---|---|
CDR | none |
Inbuilt FEC | No |
Powerbudget (dB) | 33 dB |
Transmit min/max per lane | 2 dBm / 5 dBm |
Receiver min/max per lane | -31 dBm / -9 dBm (overload) @2G |
Wavelength TX (Typical) | Channel 61 - 1528.77 nm |
Wavelength RX (Range) | 1260 - 1620 nm |
Laser | DFB |
---|---|
Receiver Type | APD |
Modulation | NRZ @2G |
Transmit and Dispersion Penalty | 1 dB |
Extinction Ratio | 8.2 dB |
Supported Protocols | 1G Fibre Channel, 2G Fibre Channel, Fast Ethernet, Gigabit Ethernet, LTE 2.458G CPRI, STM-1, STM-16, STM-4 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADTRAN 1442707G40 compatible
- ADVA 0061000901 compatible
- ADVA 0061704501-03 compatible
- Cisco Systems SFP-GE-Z compatible
- Huawei eSFP-LH120-SM196.00 compatible
- Infinera (ex. Transmode) TRX100028/961 compatible
- Juniper (ex BTI Systems) BP3AM1DX compatible
- Juniper SFP-1GE-LH compatible
- MRV SFP27DWLR12-61R compatible
- Net Insight NPA0058-1961 compatible
What customers say
When you unpack it, you immediately notice: A lot of time and love was invested in this great device. In just a few minutes everything is ready to go and the first transceiver can be configured. The app responds quickly and is well laid out, and the search function makes it easy to find the right configuration. The Flexbox is ideal for us because we use switches from many different manufacturers and can thus react flexibly to changes in our infrastructure at any time. Even on site, we can make adjustments at an instant thanks to the support for mobile devices for configuration.
We are realy happy with the FLEXBOX, programming FLEXOPTIX universal transceivers works like a charm.
Just insert, detect, select and start programming, now we are able to support hundreds off vendors with just a few standard SFP modules.
Amazing smart solution!