2.67G STM-16 SFP, 100 GHz Grid - C-Band DWDM 100 km / 29 dB, DDM, LC-Duplex

Universal SDH SFP Transceiver - 100 GHz Grid - C-Band
Use FLEXBOX to configure to almost any vendor
DWDM for multiple applications over one duplex fiber
Capable of operating in SDH / SONET networks
Supported Data Rates: 125 Mbit/s - 2.67 Gbit/s
Powerbudget of 29 dB for up to 100 km using an OS2 ITU-T G.652 fiber
Digital Diagnostic Monitoring (DDM)
Specs
  • DWDM 100 GHz
  • 100 km
  • 2.67 G
Protocols
  • 100M ETH
  • 1G ETH
  • 1G FC
  • 2G FC
  • CPRI
  • STM-1
  • STM-16
  • STM-4
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
S.1626.29.yyD

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

  • Matching Products

Lower Power Budget
2.67G STM-16 SFP, 100 GHz Grid - C-Band DWDM 40 km / 17 dB, DDM, LC-Duplex 
2.67G STM-16 SFP, 100 GHz Grid - C-Band DWDM | 40 km / 17 dB, DDM, LC-Duplex
As low as 580.98 EUR
Higher Power Budget
2.67G STM-16 SFP, 100 GHz Grid - C-Band DWDM 120 km / 33 dB, DDM, LC-Duplex 
2.67G STM-16 SFP, 100 GHz Grid - C-Band DWDM | 120 km / 33 dB, DDM, LC-Duplex
As low as 613.25 EUR
LWL Fibre Cleaner LC / Belt clip edition  
LWL Fibre Cleaner LC / Belt clip edition
58 pcs in stock 89.10 EUR
LC-Duplex to LC-Duplex Singlemode cable A1 9/125 µm, yellow, 0.25 m - 100 m 
LC-Duplex to LC-Duplex Singlemode cable | A1 9/125 µm, yellow, 0.25 m - 100 m
As low as 10.76 EUR

Specification

Form Factor SFP
Connector / Polish LC-Duplex PC
Interface DWDM
Compliance Code STM-16
Operating Temperature Standard
Modulation NRZ
Distance 100 km
Temperature Range 0°C - 70°C
Bandwidth 125 Mbit/s - 2.67 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 1.5 W
CDR none
Inbuilt FEC No
Powerbudget (dB) 29 dB
Transmit min/max per lane 0 dBm / 5 dBm
Receiver min/max per lane -29 dBm / -9 dBm (overload) @2G
Wavelength TX (Typical) Channel 61 - 1528.77 nm
Wavelength RX (Range) 1260 - 1620 nm
Laser DFB
Receiver Type APD
Modulation NRZ @2G
Transmit and Dispersion Penalty 1 dB
Extinction Ratio 8.2 dB
Supported Protocols 1G Fibre Channel, 2G Fibre Channel, Fast Ethernet, Gigabit Ethernet, LTE 2.458G CPRI, STM-1, STM-16, STM-4

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • ADVA 0061000201 compatible
  • Arris 780180 compatible
  • Brocade / Ruckus E1MG-DWDM80-C61 compatible
  • Ciena (ex. Nortel) NTK586AAE5 compatible
  • Cisco Systems DWDM-SFP-2877 compatible
  • Cisco Systems GLC-FE-100ZX compatible
  • Cisco Systems ONS-SC-2G-28.7 compatible
  • Cisco Systems SFP-GE-Z compatible
  • Huawei eSFP-LH120-SM196.10 compatible
  • Infinera (ex. Transmode) TRX100028/961 compatible
  • Juniper (ex BTI Systems) BP3AM1DE compatible
  • Juniper SFP-1GE-LH compatible
  • Marconi SU68EN compatible
  • MRV SFP27DWLR08-61R compatible
  • Net Insight NPA0058-1961 compatible
  • Nokia (ex. Alcatel-Lucent) 1AB231410002 compatible
  • Nokia Siemens Networks V50017-U3001-K500 compatible
Your vendor / compatibility is missing?

What customers say

A must-have for every network engineer.
Never again will you have to stock different transceiver types for different vendors for the infrastructure you are using.
The setup of the FLEXBOX is very easy and self-explanatory. The configuration of the FLEXOPTIX universal transceivers is done in seconds and without any problems. Thanks to the smartphone app and the Mobility Pack, even on the go without having to lug around large equipment.

Ten out of ten, absolutely recommended!

Roman Beyerle CODESYS GmbH

As an IT company specializing in the installation of network equipment, we've found FLEXBOX by FLEXOPTIX to be an invaluable tool. Its versatility across various transceivers and user-friendly interface has made our job easier and more efficient.

One of the most impressive aspects of FLEXBOX is the reusability of the transceivers. This feature allows us to reconfigure and reuse the transceivers as needed, offering unprecedented flexibility and cost savings.

The performance is robust, and FLEXBOX has not only saved us time but also provided a cost-effective solution without sacrificing quality.

In summary, FLEXBOX by FLEXOPTIX is a must-have tool for anyone in the networking field. We wholeheartedly recommend it and give it a five-star rating.

Gregory Baer CEO / World-Connect Sàrl

We are realy happy with the FLEXBOX, programming FLEXOPTIX universal transceivers works like a charm.
Just insert, detect, select and start programming, now we are able to support hundreds off vendors with just a few standard SFP modules.
Amazing smart solution!

Stefan van Merriënboer Senior ICT Consultant / Effisol

FLEXBOX makes it easier than ever to manage your optics hardware! From unboxing to a configured module in a minute! Great product.

Otto Lodewijk Director / SuitIT
More