1G SFP CWDM EX Extended ~40 km / 19 dB, 1270 nm - 1610 nm, DDM, LC-Duplex
- CWDM
- ~40 km / 19 dB
- 1.25 G
- Industrial
- 1G ETH
- 1G FC
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | CWDM |
| Compliance Code | CWDM EX |
| Operating Temperature | Industrial |
| Modulation | NRZ |
| Distance | 40 km |
| Temperature Range | -20°C - 85°C |
| Bandwidth | 1.05 Gbit/s - 1.25 Gbit/s |
|---|---|
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 1 W |
| CDR | none |
| Inbuilt FEC | No |
| Powerbudget (dB) | 19 dB |
| Transmit min/max per lane | -5 dBm / 0 dBm |
| Receiver min/max per lane | -24 dBm / -3 dBm (overload) @1G |
| Wavelength TX (Typical) | Channel R - 1610 nm |
|---|---|
| Wavelength RX (Range) | 1260 - 1620 nm |
| Laser | DFB |
| Receiver Type | PIN |
| Modulation | NRZ @1G |
| Transmit and Dispersion Penalty | 1 dB |
| Extinction Ratio | 8.2 dB |
| Supported Protocols | 1G Fibre Channel, Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Ericsson ERC-SFP-1G-CWDM1610 compatible
- Hirschmann M-SFP-LH/LC compatible
- Planet MGB-TL30 compatible
What customers say
The FLEXBOX was easy to set up and use, and the programmable transceivers worked seamlessly in several different brand devices. This will make our spares much easier to manage.
When you unpack it, you immediately notice: A lot of time and love was invested in this great device. In just a few minutes everything is ready to go and the first transceiver can be configured. The app responds quickly and is well laid out, and the search function makes it easy to find the right configuration. The FLEXBOX is ideal for us because we use switches from many different manufacturers and can thus react flexibly to changes in our infrastructure at any time. Even on site, we can make adjustments at an instant thanks to the support for mobile devices for configuration.
The flashing is very quick and you can configure it to flash multiple devices in a row. Definitely well worth it.
A must-have for every network engineer.
Never again will you have to stock different transceiver types for different vendors for the infrastructure you are using.
The setup of the FLEXBOX is very easy and self-explanatory. The configuration of the FLEXOPTIX universal transceivers is done in seconds and without any problems. Thanks to the smartphone app and the Mobility Pack, even on the go without having to lug around large equipment.
Ten out of ten, absolutely recommended!