50G QSFP28 ER with dual CDR 40 km, λ1310 nm, LC-Duplex, Singlemode

Universal QSFP28 Transceiver
Use FLEXBOX to configure to almost any vendor
For 50GBASE-ER Ethernet links
Integrated Clock-Data-Recovery (CDR)
PAM4 modulated signal
Supported Data Rates: 53.13 Gbit/s
Up to 40 km via Singlemode OS2
LC-Duplex Connector
Specs
  • 1310 nm
  • 40 km
  • 53.13 G
  • LC
Protocols
  • 50G ETH
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
Q.13S50G.40:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

  • Matching Products

Lower Power Budget
50G QSFP28 LR with dual CDR 10 km, λ1311 nm, LC-Duplex, Singlemode 
50G QSFP28 LR with dual CDR | 10 km, λ1311 nm, LC-Duplex, Singlemode
0 pcs in stock As low as 527.18 EUR
LWL Fibre Cleaner LC / Belt clip edition  
LWL Fibre Cleaner LC / Belt clip edition
30 pcs in stock 97.02 EUR
LC-Duplex to LC-Duplex Singlemode cable A1 9/125 µm, yellow, 0.25 m - 100 m 
LC-Duplex to LC-Duplex Singlemode cable | A1 9/125 µm, yellow, 0.25 m - 100 m
As low as 11.72 EUR

Specification

Form Factor QSFP28
Connector / Polish LC-Duplex PC
Interface Singlemode
Compliance Code ER
Distance 40 km
Temperature Range 0°C - 70°C
Bandwidth 53.13 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 4.5 W
CDR TX and RX
SGMII No
Inbuilt FEC No
Powerbudget (dB) 19.5 dB
Transmit min/max per lane 1.5 dBm / 8 dBm
Receiver min/max per lane -18 dBm / -3 dBm (overload) @50G
Wavelength TX (Typical) 1310 nm
Wavelength TX (Range) 1304.5 - 1317.5 nm
Wavelength RX (Typical) 1310 nm
Wavelength RX (Range) 1304.5 - 1317.5 nm
Laser EML
Receiver Type APD
Modulation PAM4 @50G
Transmit and Dispersion Penalty 3.4 dB
Extinction Ratio 4.5 dB
Supported Protocols 50G Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
Your vendor / compatibility is missing?

What customers say

It's just a genius device. So easy to use and simple! I would recommend it to every network engineer. Plug-in the module, program and its ready for deployment!
David Schoefberger Schoefberger
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore. The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that. As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
Thomas Verschuren Technical Consultant, IP Visie Networking B.V.
In our test environment we use the optics over and over in many devices. Programming optics with the FLEXBOX is as easy as 1,2,3!
Erwin ter Hofstede CEO, EC-Hosting
Definitely, FLEXOPTIX will be my optics supplier from today. The ability to compatibilize optics across multiple vendors is going to save us from many headaches. The FLEXBOX is a must for any company using optical network equipment.
Miguel Bérniz Chief Technical Officer, GibFibre Ltd
More