400G QSFP112 PLR4 with dual CDR 10 km, 4x λ1311 nm, MTP/MPO-8/12 APC, Singlemode

Universal QSFP112 Transceiver
Use FLEXBOX to configure to almost any vendor
For 400GBASE-PLR4 Ethernet links
Integrated Clock-Data-Recovery (CDR)
PAM4 modulated signal
Supported Data Rates: 425 Gbit/s (4x 106.25 Gbit/s)
Up to 10 km via Singlemode OS2
Use ONLY with MTP/MPO-8/12 APC connectors
Specs
  • pl_lambda 4x 1311 nm
  • pl_distance 10 km
  • pl_datarate 425 G
  • pl_connector MTP/MPO-8/12
Protocols
  • 100G ETH
  • 400G ETH
  • 4x 100G ETH
information-circle
Selection "S2":
Country of Origin
Germany,
Belgium,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility chevron-right
Part number
Q.134HG.10:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
x Cancel OK chevron-right
information-circle You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

    chevron-down

  • Matching Products

    chevron-down
pl_distance Lower Power Budget
400G QSFP112 DR4+ with dual CDR 2 km, 4x λ1311 nm, MTP/MPO-8/12 APC, Singlemode 
400G QSFP112 DR4+ with dual CDR | 2 km, 4x λ1311 nm, MTP/MPO-8/12 APC, Singlemode
1 pcs in stock As low as 814.88 EUR
100G QSFP28 LR with dual CDR 10 km, λ1311 nm, LC-Duplex, Singlemode 
100G QSFP28 LR with dual CDR | 10 km, λ1311 nm, LC-Duplex, Singlemode
1733 pcs in stock As low as 311.02 EUR
MTP® female APC to MTP® female APC Singlemode cable 8 Cores, MPO compliant, A1 9/125 µm, yellow, 0.5 m - 100 m 
MTP® female APC to MTP® female APC Singlemode cable | 8 Cores, MPO compliant, A1 9/125 µm, yellow, 0.5 m - 100 m
As low as 86.48 EUR
400G QSFP-DD PLR4 with dual CDR 10 km, 4x λ1311 nm, MTP/MPO-8/12 APC, Singlemode 
400G QSFP-DD PLR4 with dual CDR | 10 km, 4x λ1311 nm, MTP/MPO-8/12 APC, Singlemode
34 pcs in stock As low as 846.48 EUR
pdp_spec

Specification

Form Factor QSFP112
Connector / Polish MTP/MPO-8/12 APC
Interface Singlemode
Compliance Code PLR4
Operating Temperature Standard
Modulation PAM4
Distance 10 km
Temperature Range 0°C - 70°C
Lane Count 4x (Tx/Rx)
Bandwidth 425 Gbit/s
Bandwidth Per Lane 106.25 Gbit/s
Digital Diagnostic Monitoring (DDM) Yes, internally calibrated
Power Consumption 9 W
CDR TX and RX
SGMII No
Inbuilt FEC Yes, KP4
Powerbudget (dB) 4.2 dB
Transmit min/max per lane -1.9 dBm / 4.8 dBm
Receiver min/max per lane -6.1 dBm / 4.8 dBm (overload) @400G
Wavelength TX (Typical) 4x 1311 nm
Wavelength TX (Range) 1304.5 - 1317.5 nm
Wavelength RX (Typical) 4x 1311 nm
Laser EML
Receiver Type PIN
Modulation PAM4 @400G
Transmit and Dispersion Penalty 3.4 dB
Extinction Ratio 3.5 dB
Supported Protocols 4x 100G Ethernet, 400G Ethernet, 100G Ethernet
FLEXBOX

Transceiver Configuration with FLEXBOX

It's that easy to use
insert
Insert into the FLEXBOX
select
Select and Configure
use
Use with Device
How to get your free FLEXBOX? chevron-right
pdp_comp

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
Your vendor / compatibility is missing?
pdp_recom

What customers say

We are realy happy with the FLEXBOX, programming FLEXOPTIX universal transceivers works like a charm.
Just insert, detect, select and start programming, now we are able to support hundreds off vendors with just a few standard SFP modules.
Amazing smart solution!

Stefan van Merriënboer Senior ICT Consultant / Effisol

I have received my orders from them in blistering speed. Happy to the nth degree.

Pat Cluney  Senior Technical Officer / Waterford Institute of Technology

In our test environment we use the optics over and over in many devices. Programming optics with the FLEXBOX is as easy as 1,2,3!

Erwin ter Hofstede CEO / EC-Hosting

We will now be able to source all our SFPs from a single vendor without having to worry about the configuration. That translates to peace of mind and huge flexibility. Well done guys! 

Gregory Agerba CTO / Neocarrier Communications
More chevron-right