100G QSFP28 PLR4 with dual CDR 10 km, 4x λ1310 nm, MTP/MPO-8/12 APC, Singlemode
- 4x 1310 nm
- 10 km
- 103.12 G
- MTP/MPO-8/12
- 100G ETH
- 25G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | QSFP28 |
|---|---|
| Connector / Polish | MTP/MPO-8/12 APC |
| Interface | Singlemode |
| Compliance Code | PLR4 |
| Operating Temperature | Standard |
| Modulation | NRZ |
| Distance | 10 km |
| Temperature Range | 0°C - 70°C |
| Lane Count | 4x (Tx/Rx) |
| Bandwidth | 103.12 Gbit/s |
| Bandwidth Per Lane | 25.78 Gbit/s |
|---|---|
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 3.5 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 8.1 dB |
| Transmit min/max per lane | -5.5 dBm / 0.5 dBm |
| Receiver min/max per lane | -13.6 dBm / 0.5 dBm (overload) @100G |
| Wavelength TX (Typical) | 4x 1310 nm |
| Wavelength TX (Range) | 1295 - 1325 nm |
|---|---|
| Wavelength RX (Typical) | 4x 1310 nm |
| Laser | DFB |
| Receiver Type | PIN |
| Modulation | NRZ @100G |
| Transmit and Dispersion Penalty | 3 dB |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 100G Ethernet, 25G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Juniper QSFP-4X25G-LR compatible
What customers say
For years we struggled with hundreds of transceivers from different vendors but this is finally over!
With FLEXBOX we can easily reconfigure our transceivers which in the end saves a lot of time and money.
Everything is build for and runs in the cloud today, the Aviatrix Multicloud solution as well.
Still, we have customers asking for a highperformance encryption from “their” premises to the cloud and this is where our CloudN appliances come into play.
If customers ask us to support the installation of our appliances, we’ll do everything we can to help. And then it’s good to know that if you sneak into a datacenter, you can rely on FLEXOPTIX to even fulfil that connection(s) that are terminating on a device that was missing or has changed in the architecture you discussed before.
Thanks for the brilliant service!
With the FLEXBOX we’re able to use our Transceivers universally in all kind of equipment and reduce the stock keeping significantly. Just awesome!
The FLEXBOX allows us to use 100MBit/s to multi-gigabit transceivers in our product for a wide range of customer needs. We can not solve them without this magic box!