100G QSFP28 PIR4 with dual CDR 2 km, 4x λ1310 nm, MTP/MPO-8/12 APC, Singlemode

Universal QSFP28 Transceiver
Use FLEXBOX to configure to almost any vendor
For 100GBASE-PIR4 Ethernet links
Integrated Clock-Data-Recovery (CDR)
Supported Data Rates: 103.12 Gbit/s (4x 25.78 Gbit/s)
Up to 2 km via Singlemode OS2
Use ONLY with MTP/MPO-8/12 APC connectors
Specs
  • 4x 1310 nm
  • 2 km
  • 103.12 G
  • MTP/MPO-8/12
Protocols
  • 100G ETH
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
Q.131HG.2:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

  • Matching Products

Higher Power Budget
100G QSFP28 PLR4 with dual CDR 10 km, 4x λ1310 nm, MTP/MPO-8/12 APC, Singlemode 
100G QSFP28 PLR4 with dual CDR | 10 km, 4x λ1310 nm, MTP/MPO-8/12 APC, Singlemode
0 pcs in stock As low as 464.66 EUR
MTP® APC to 4x LC-Duplex Singlemode Breakout cable 8 Cores, MPO compliant, A1 9/125 µm, yellow, 0.5 m - 100 m 
MTP® APC to 4x LC-Duplex Singlemode Breakout cable | 8 Cores, MPO compliant, A1 9/125 µm, yellow, 0.5 m - 100 m
As low as 82.33 EUR
MTP® APC to MTP® APC Singlemode cable 8 Cores, MPO compliant, A1 9/125 µm, yellow, 0.5 m - 100 m 
MTP® APC to MTP® APC Singlemode cable | 8 Cores, MPO compliant, A1 9/125 µm, yellow, 0.5 m - 100 m
As low as 92.98 EUR

Specification

Form Factor QSFP28
Connector / Polish MTP/MPO-8/12 APC
Interface Singlemode
Compliance Code PIR4
Operating Temperature Standard
Modulation NRZ
Distance 2 km
Temperature Range 0°C - 70°C
Lane Count 4x (Tx/Rx)
Bandwidth 103.12 Gbit/s
Bandwidth Per Lane 25.78 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 3.5 W
CDR TX and RX
SGMII No
Inbuilt FEC No
Powerbudget (dB) 8 dB
Transmit min/max per lane -4 dBm / 2 dBm
Receiver min/max per lane -12 dBm / 3 dBm (overload) @100G
Wavelength TX (Typical) 4x 1310 nm
Wavelength TX (Range) 1295 - 1325 nm
Wavelength RX (Typical) 4x 1310 nm
Laser DFB
Receiver Type PIN
Modulation NRZ @100G
Extinction Ratio 3.5 dB
Supported Protocols 100G Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • ADVA 1061800752-01 compatible
  • Arista 3rd_Party QSFP-100G-PSM4 compatible
  • Arista QSFP-100G-PSM4 compatible
  • Cisco Systems QSFP-100G-PSM4-S compatible
  • Cumulus Networks QSFP28 PSM4 compatible
  • Dell 407-BCPX compatible
  • Evertz QSFP25G-SM-PSM4-LR-G-NFEC compatible
  • Extreme 10405 compatible
  • Huawei QSFP28-100G-PSM4 compatible
  • Juniper JNP-QSFP-100G-PSM4 compatible
  • Keysight (ex. Ixia) QSFP28 PSM4 compatible
  • Nvidia (ex. Mellanox) MMS1C00-C500 compatible
  • Nvidia (ex. Mellanox) MMS1C10-CM compatible
Your vendor / compatibility is missing?

What customers say

The FLEXBOX has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!

We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.

The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.

The FLEXOPTIX universal transceivers are very easy to configure and we will be ordering these in the future.

Tim Waterham ICT Infrastructure Engineer / Wyre Borough Council

I have my own company, and I work as a network consultant for different customers, especially in the wind turbine business. I am often on turbine sites in the middle of the ocean, where I need a SFP of a certain type/vendor. By using the FLEXOPTIX FLEXBOX, I have solved a very big issue, just by having this tool and some FLEXOPTIX SFP`s in my bag. Then I can solve the issue, and get the site up and running immediately. This saves another trip to site (often by helicopter), and a lot of money and time. I am very exited about this product, and will certainly recommend this product to everybody.

Poul Pedersen Network consultant / Ipwork consult ApS

Everything is build for and runs in the cloud today, the Aviatrix Multicloud solution as well.
Still, we have customers asking for a highperformance encryption from “their” premises to the cloud and this is where our CloudN appliances come into play.
If customers ask us to support the installation of our appliances, we’ll do everything we can to help. And then it’s good to know that if you sneak into a datacenter, you can rely on FLEXOPTIX to even fulfil that connection(s) that are terminating on a device that was missing or has changed in the architecture you discussed before.
Thanks for the brilliant service!

Gerald Buchholz Principal Solution Architect / Aviatrix

With the FLEXBOX we’re able to use our Transceivers universally in all kind of equipment and reduce the stock keeping significantly. Just awesome!

Christian Seitz Head of Network / STRATO AG
More