10G SFP+, 100 GHz Grid - C-Band DWDM ZR+ 100 km / 25 dB, LC-Duplex
- DWDM 100 GHz
- 100 km
- 11.3 G
- 10G ETH
- 10G FC
- 1G ETH
- 8G FC
- CPRI
- OBSAI
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP+ |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | DWDM |
| Compliance Code | DWDM ZR+ |
| Operating Temperature | Standard |
| Modulation | NRZ |
| Distance | 100 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 600 Mbit/s - 11.3 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
|---|---|
| Power Consumption | 1 W |
| CDR | none |
| Inbuilt FEC | No |
| Powerbudget (dB) | 25 dB |
| Transmit min/max per lane | 0 dBm / 4 dBm |
| Receiver min/max per lane | -25 dBm / -8 dBm (overload) @10G |
| Wavelength TX (Typical) | Channel 61 - 1528.77 nm |
| Wavelength RX (Range) | 1260 - 1620 nm |
| Laser | EML |
|---|---|
| Receiver Type | APD |
| Modulation | NRZ @10G |
| Transmit and Dispersion Penalty | 3 dB |
| Chromatic Dispersion Tolerance | -500 ps/nm to 1,600 ps/nm @10G |
| Extinction Ratio | 9 dB |
| Supported Protocols | 10G Ethernet, 10G FC, 8G Fibre Channel, Gigabit Ethernet, LTE 0.614G CPRI, LTE 0.768G OBSAI, LTE 1.22G CPRI, LTE 1.536G OBSAI, LTE 2.458G CPRI, LTE 3.072G OBSAI, LTE 4.915G CPRI, LTE 6.144G CPRI, LTE 6.144G OBSAI, LTE 7.373G CPRI, LTE 9.830G CPRI |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADVA 1061702301-01 compatible
- Cisco Systems SFP-10G-ZR compatible
- Extreme 10309 compatible
- Infinera (ex. Transmode) TRX100109/961 compatible
- Juniper SFP-10GE-ZR compatible
- Nokia (ex. Alcatel-Lucent) 3HE05894AA compatible
What customers say
The FLEXBOX has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the FLEXBOX was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.
Looking forward to keep using the FLEXBOX in the future! :)
I have my own company, and I work as a network consultant for different customers, especially in the wind turbine business. I am often on turbine sites in the middle of the ocean, where I need a SFP of a certain type/vendor. By using the FLEXOPTIX FLEXBOX, I have solved a very big issue, just by having this tool and some FLEXOPTIX SFP`s in my bag. Then I can solve the issue, and get the site up and running immediately. This saves another trip to site (often by helicopter), and a lot of money and time. I am very exited about this product, and will certainly recommend this product to everybody.
Have been using FLEXOPTIX transceivers for a few years now in a carrier/telecoms environment for various vendors and they've never disappointed me. After having the opportunity to be able to program them myself on demand, I've realized how many hours I could have saved until now with FLEXBOX! No large stocks, just a few generic SFPs in stock waiting to get programmed when needed. Awesome!
I had the chance to flash my first transceiver with the FLEXBOX and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the FLEXBOX. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my FLEXBOX for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.