10G SFP+, 100 GHz Grid - C-Band DWDM ZR with dual CDR 80 km / 23 dB, LC-Duplex

- DWDM 100 GHz
- 80 km
- 11.1 G
- Dual CDR
- 10G ETH
- STM-64
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | SFP+ |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | DWDM |
Compliance Code | DWDM ZR |
Operating Temperature | Standard |
Modulation | NRZ |
Distance | 80 km |
Temperature Range | 0°C - 70°C |
Bandwidth | 9.95 Gbit/s - 11.1 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
---|---|
Power Consumption | 2.2 W |
CDR | TX and RX |
Inbuilt FEC | No |
Powerbudget (dB) | 23 dB |
Transmit min/max per lane | 0 dBm / 5 dBm |
Receiver min/max per lane | -23 dBm / -8 dBm (overload) @10G |
Wavelength TX (Typical) | Channel 61 - 1528.77 nm |
Wavelength RX (Range) | 1260 - 1620 nm |
Laser | EML |
---|---|
Receiver Type | APD |
Modulation | NRZ @10G |
Transmit and Dispersion Penalty | 3.5 dB |
Chromatic Dispersion Tolerance | -500 ps/nm to 1,600 ps/nm @10G |
Extinction Ratio | 8.2 dB |
Supported Protocols | 10G Ethernet, STM-64 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Edge Core ET5402-ZR-I compatible
What customers say
We heard about FLEXOPTIX for the quality of its FLEXBOX and optics.
We were able to acquire a FLEXBOX to help out our customers. The quality of the product leaves us speechless. We are immediately going to change optics supplier to FLEXOPTIX. The quality is excellent.
FLEXBOX allows us to reduce the amount of spare transceivers we keep for our diverse hardware systems, thereby keeping overall cost low.
The FLEXBOX allows us to quickly configure our transceivers for every application. No more need to keep transceivers of every type and vendor in stock. Any problems with a transceiver configuration? Thanks to the lightning fast FLEXOPTIX Service Desk you’ll solve every issue as quick as possible.
FLEXBOX makes it easier than ever to manage your optics hardware! From unboxing to a configured module in a minute! Great product.