10G SFP+, 100 GHz Grid - C-Band DWDM ZR+ with dual CDR 80 km / 25 dB, LC-Duplex
- DWDM 100 GHz
- 80 km
- 11.3 G
- Dual CDR
- 10G ETH
- 10G FC
- OTU2
- STM-64
Specification
| Form Factor | SFP+ |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | DWDM |
| Compliance Code | DWDM ZR+ |
| Operating Temperature | Standard |
| Modulation | NRZ |
| Distance | 80 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 9.95 Gbit/s - 11.3 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
|---|---|
| Power Consumption | 2.3 W |
| CDR | TX and RX |
| Inbuilt FEC | No |
| Powerbudget (dB) | 25 dB |
| Transmit min/max per lane | 0 dBm / 5 dBm |
| Receiver min/max per lane | -25 dBm / -8 dBm (overload) @10G |
| Wavelength TX (Typical) | Channel 61 - 1528.77 nm |
| Wavelength RX (Range) | 1520 - 1600 nm |
| Laser | EML |
|---|---|
| Receiver Type | APD |
| Modulation | NRZ @10G |
| Transmit and Dispersion Penalty | 3 dB |
| Chromatic Dispersion Tolerance | -500 ps/nm to 1,600 ps/nm @10G |
| Extinction Ratio | 9 dB |
| Supported Protocols | 10G Ethernet, 10G FC, OTU2, STM-64 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Brocade 10G-SFPP-ER compatible
- Cisco Systems SFP-10G-ZR compatible
- Edge Core ET5402-ZR-I compatible
- Huawei OSX080N01 compatible
- Juniper QFX-SFP-10GE-ER compatible
What customers say
We will now be able to source all our SFPs from a single vendor without having to worry about the configuration. That translates to peace of mind and huge flexibility. Well done guys!
A must-have for every network engineer.
Never again will you have to stock different transceiver types for different vendors for the infrastructure you are using.
The setup of the FLEXBOX is very easy and self-explanatory. The configuration of the FLEXOPTIX universal transceivers is done in seconds and without any problems. Thanks to the smartphone app and the Mobility Pack, even on the go without having to lug around large equipment.
Ten out of ten, absolutely recommended!
Spending a few minutes of my time, first and foremost expressing how much I’m impressed by your friendliness, is the least I can do. Friendliness was followed by super-fast order processing and delivery. In a few words, unboxing and using your FLEXBOX is an utterly awesome experience. As in brilliant. Also saving us loads of time ordering optics. In addition to all of this – you deliver particular good build quality, too. You’ve got me impressed, thank you!
The SFPs easily integrated with our existing network equipment, ensuring cross-vendor compatibility. The build quality is very good.
Connecting to the FLEXBOX with an Android phone took only a few seconds, and configuring the SFPs was a breeze. We really liked the ability to configure multiple SFPs at once. Shipping is incredibly fast. Support is friendly, technical and helpful.