10G SFP+ ER Industrial 40 km, λ1310 nm, LC-Duplex, Singlemode
- 1310 nm
- 40 km
- 10.3 G
- Industrial
- 10G ETH
- 10G FC
- 1G ETH
- 8G FC
- CPRI
- OBSAI
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | SFP+ |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | Singlemode |
Compliance Code | ER |
Distance | 40 km |
Temperature Range | -40°C - 85°C |
Bandwidth | 1.25 Gbit/s - 10.3 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
Power Consumption | 1.5 W |
CDR | none |
---|---|
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 15 dB |
Transmit min/max per lane | 0 dBm / 5 dBm |
Receiver min/max per lane | -15 dBm / 0.5 dBm (overload) @10G |
Wavelength TX (Typical) | 1310 nm |
Wavelength TX (Range) | 1260 - 1355 nm |
Wavelength RX (Typical) | 1310 nm |
Wavelength RX (Range) | 1260 - 1355 nm |
---|---|
Laser | DFB |
Receiver Type | PIN |
Modulation | NRZ @10G |
Transmit and Dispersion Penalty | 3.2 dB |
Extinction Ratio | 3.5 dB |
Supported Protocols | 10G Ethernet, 10G FC, 8G Fibre Channel, Gigabit Ethernet, LTE 1.22G CPRI, LTE 1.536G OBSAI, LTE 2.458G CPRI, LTE 3.072G OBSAI, LTE 4.915G CPRI, LTE 6.144G CPRI, LTE 6.144G OBSAI, LTE 7.373G CPRI, LTE 9.830G CPRI |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- A10networks # compatible
- ADTRAN 1442440G1 compatible
- ADVA # compatible
- Allied Telesis AT-SP10ER40/I compatible
- Arbor Networks # compatible
- Arista 3rd_Party SFP-10G-ER compatible
- Arris # compatible
- Aruba Networks # compatible
- Avaya (ex. Nortel) AA1403013-E6 compatible
- Broadcom # compatible
- Brocade / Ruckus 10G-SFPP-ER compatible
- Brocade 10G-SFPP-ER compatible
- Brocade XBR-000174 compatible
- Centec # compatible
- Check Point # compatible
- Chelsio # compatible
- Ciena # compatible
- Ciena (ex. Nortel) # compatible
- Cisco (ex. Meraki) # compatible
- Cisco Systems SFP-10G-ER compatible
- Cisco Systems SFP-10G-ER -S compatible
- CTC Union ISFP-S9040-31-DE compatible
- D-LINK # compatible
- Dell # compatible
- Dell (ex. Force10) # compatible
- Edge Core # compatible
- Extreme (ex. Enterasys) 10GB-ER-SFPP compatible
- Extreme 10309 compatible
- F5 Networks # compatible
- FibroLAN SFPP-15-40 compatible
- Fluke Networks # compatible
- Fortinet # compatible
- Fujitsu # compatible
- HP H3C # compatible
- HP Storage (B-Series) AW538A compatible
- Huawei OSX040N01 compatible
- Infinera (ex. Transmode) TRX100116 compatible
- Intel E10GSFPLR compatible
- Juniper SFP-10GE-ER compatible
- Keymile 37973312 compatible
- Keysight (ex. Ixia) SM1310-PLUS compatible
- KTI Networks SFP-10G-ER-A compatible
- LANCOM # compatible
- Lenovo (ex. Blade Network) # compatible
- LevelOne # compatible
- MikroTik # compatible
- Motorola # compatible
- Moxa SFP-10GERLC compatible
- MRV # compatible
- NetApp # compatible
- Netgear AXM762 compatible
- NetOptics SFP+KT-ER compatible
- Nokia (ex. Alcatel-Lucent) 3FE62600DA compatible
- Nokia (ex. Alcatel-Lucent) 3HE05036AA compatible
- Nokia Siemens Networks # compatible
- Nvidia (ex. Mellanox) # compatible
- Oracle # compatible
- Packetlight SL110 compatible
- Palo Alto Networks # compatible
- Quanta # compatible
- Radware # compatible
- Ribbon (ex. ECI) # compatible
- Solarflare SFM10G-ER compatible
- SonicWALL # compatible
- Sophos # compatible
- Supermicro # compatible
- TP-LINK # compatible
- Transition Networks TN-10GSFP-LR4 compatible
- WatchGuard # compatible
- Wildpackets # compatible
- Zyxel SFP10G-ER compatible
What customers say
I had the chance to flash my first transceiver with the flexbox and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the Flexbox. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my flexbox for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.