10G SFP+ LR Extended with dual CDR 10 km, λ1310 nm, LC-Duplex, Singlemode
SFP+
LR
Universal SFP+ Transceiver
Use FLEXBOX to configure to almost any vendor
For 10GBASE-LR Ethernet links
Integrated Clock-Data-Recovery (CDR)
Supported Data Rates: 8.5 Gbit/s - 11.3 Gbit/s
Up to 10 km via Singlemode OS2
LC-Duplex Connector
Operating Temperature from -5°C to 85°C
Specs
- 1310 nm
- 10 km
- 11.3 G
- Extended
Protocols
- 10G ETH
- 10G FC
- OTU2
- STM-64
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP+ |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | LR |
| Distance | 10 km |
| Temperature Range | -5°C - 85°C |
| Bandwidth | 8.5 Gbit/s - 11.3 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 1.5 W |
| CDR | TX and RX |
|---|---|
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 6.2 dB |
| Transmit min/max per lane | -8.2 dBm / 0.5 dBm |
| Receiver min/max per lane | -14.4 dBm / 0.5 dBm (overload) @10G |
| Wavelength TX (Typical) | 1310 nm |
| Wavelength TX (Range) | 1270 - 1355 nm |
| Wavelength RX (Typical) | 1310 nm |
| Wavelength RX (Range) | 1260 - 1565 nm |
|---|---|
| Laser | DFB |
| Receiver Type | PIN |
| Modulation | NRZ @10G |
| Transmit and Dispersion Penalty | 3.2 dB |
| Extinction Ratio | 5 dB |
| Supported Protocols | 10G Ethernet, 10G FC, OTU2, STM-64 |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- A10networks # 12358 compatible
- ADTRAN # compatible
- ADVA # compatible
- Allied Telesis # 12360 compatible
- Arista 3rd_Party # 12361 compatible
- Aruba Networks(ex. HP Network) J9151A compatible
- Brocade / Ruckus 10G-SFPP-LR compatible
- Brocade 10G-SFPP-LR compatible
- Calix 100-01512 compatible
- Check Point # 12364 compatible
- Chelsio # 12365 compatible
- Ciena (ex. Nortel) # 12366 compatible
- Cisco Systems SFP-10G-LR compatible
- D-LINK # 12368 compatible
- Dell # 12367 compatible
- Dell (ex. Force10) # 12373 compatible
- Edge Core # compatible
- Extreme # 12370 compatible
- Extreme (ex. Enterasys) # 12369 compatible
- F5 Networks # 12371 compatible
- FibroLAN # compatible
- Fluke Networks # 12372 compatible
- Fortinet # 12374 compatible
- Fujitsu # 12375 compatible
- HP H3C JD094B compatible
- Huawei OSX010000 compatible
- Infinera (ex. Transmode) # 12393 compatible
- Intel E10GSFPLR compatible
- Juniper # 12380 compatible
- Keymile # 12381 compatible
- KTI Networks # 12382 compatible
- LANCOM # 12383 compatible
- Lenovo (ex. Blade Network) # 12378 compatible
- LevelOne # 12384 compatible
- MikroTik S+31DLC10D compatible
- Motorola # compatible
- Moxa # 12386 compatible
- MRV # 12387 compatible
- Netgear # 12388 compatible
- Nokia (ex. Alcatel-Lucent) 3HE04823AA compatible
- Nokia Siemens Networks # 12389 compatible
- Nvidia (ex. Mellanox) # compatible
- Oracle # compatible
- Packetlight SL110 compatible
- Packetlight SL112 compatible
- Palo Alto Networks # 12390 compatible
- Radware # 12391 compatible
- Ribbon (ex. ECI) OTPMR_PI3 compatible
- Solarflare # compatible
- Supermicro # 12392 compatible
- TP-LINK # compatible
- Transition Networks # compatible
- Zyxel # compatible
Your vendor / compatibility is missing?
What customers say
Ordering and using FLEXOPTIX transceivers was far quicker than even getting a quote from traditional vendors.
Using the FLEXBOX is super easy and fast - 5 minutes to get transceivers ready including unboxing and enjoying packaged marshmallows.
Bronislav Robenek
Network Architect, Cloud4com
FLEXOPTIX have saved us from the misery and disappointment of searching in vain through our box of old, single-vendor transceivers when we need to connect up a device, only to find we don’t have a compatible module. Having the FLEXBOX and programmable transceivers in our toolbox means we’ve always got the right transceiver for any device. The icing on the cake is the mobility pack which allows you to program any transceivers, anywhere, any time, with just a mobile phone and the FLEXBOX . Absolutely brilliant and couldn't ask for more.
Stuart Willson
Infrastructure Engineer/ Surrey Satellite Technology Limited
The SFP are exactly like promise on the web page, and the configuration tool is so amazing. I worked years with SFP and optical fiber and this tool is so great. It include a power meter an OTDR and allow to diagnose and configure the SFP for many vendors. It will help us in our research and also to manage our LAN.
Thank you FLEXOPTIX
Sylvain Brisebois
Advance Research, Senior Firmware Engineer, KINOVA
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore.
The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that.
As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
Thomas Verschuren
Technical Consultant, IP Visie Networking B.V.