25G SFP28 LR Industrial with dual CDR 10 km, λ1310 nm, LC-Duplex, Singlemode
Universal SFP28 Transceiver
Use FLEXBOX to configure to almost any vendor
For 25GBASE-LR Ethernet links
Integrated Clock-Data-Recovery (CDR)
Supported Data Rates: 25.78 Gbit/s
Up to 10 km via Singlemode OS2
LC-Duplex Connector
Operating Temperature from -40°C to 85°C
Specs
- 1310 nm
- 10 km
- 25.78 G
- Industrial
Protocols
- 25G ETH
-
Alternatives
Part number
P.1325G.10.I
In stock
509 pcs
Your price
List price
Your price
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.
Just go to cart and click CREATE QUOTE.
-
Alternatives
Specification
Form Factor | SFP28 |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | Singlemode |
Type | LR |
Distance | 10 km |
Temperature Range | -40°C - 85°C |
Bandwidth | 25.78 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
Power Consumption | 1.5 W |
CDR | TX and RX |
---|---|
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 2.5 dB |
Transmit min/max per lane | -7 dBm / 2 dBm |
Receiver min/max per lane | -9.5 dBm / 2.2 dBm (overload) |
Wavelength TX (Typical) | 1310 nm |
Wavelength TX (Range) | 1295 - 1325 nm |
Wavelength RX (Typical) | 1310 nm |
Wavelength RX (Range) | 1295 - 1325 nm |
---|---|
Laser | DFB |
Receiver Type | PIN |
Modulation | NRZ |
Transmit and Dispersion Penalty | 2.7 dB |
Extinction Ratio | 3.5 dB |
Supported Protocols | 25G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Cisco Systems SFP-10/25G-LR-S compatible
- Cisco Systems SFP-25G-LR-S compatible
- Extreme 10504 compatible
- Juniper JNP-SFP-25G-LR compatible
- Nokia (ex. Alcatel-Lucent) 3HE14835AA compatible
- Nokia Siemens Networks AOSC 474901A.101 compatible
- Nokia Siemens Networks AOSD 474902A.101 compatible
- Nvidia (ex. Mellanox) MMA2L20-AR compatible
Your vendor / compatibility is missing?
What customers say
Very easy to use and quick too. I particularly like the ability to use the same configuration on a number of transceivers just by ticking a box - a real time saver
Mike Dallaway
Mira 2014 Limited
Since we ordered a FLEXBOX, our life as definitly changed.
There’s a before and an after FLEXBOX.
So many vendors in the compatibility matrice, so easy way to configure the module!
And the cables and accessories came also with quality.
Stéphane Gouron
Directeur Agence Ouest, S-cube.
Ordering and using FLEXOPTIX transceivers was far quicker than even getting a quote from traditional vendors.
Using the FLEXBOX is super easy and fast - 5 minutes to get transceivers ready including unboxing and enjoying packaged marshmallows.
Bronislav Robenek
Network Architect, Cloud4com
For years we struggled with hundreds of transceivers from different vendors but this is finally over!
With FLEXBOX we can easily reconfigure our transceivers which in the end saves a lot of time and money.
Marcel Wösle
Director Infrastructure Services, Avira Operations GmbH & Co.KG