2x 400G Finned-Top OSFP DR4+ with dual CDR 2 km, 8x λ1311 nm, MTP/MPO-8/12 APC, Singlemode

Universal Finned-Top OSFP Transceiver
Use FLEXBOX in combination with FLEXSOX to configure to almost any vendor
For 400GBASE-DR4+ Ethernet links
Integrated Clock-Data-Recovery (CDR)
PAM4 modulated signal
Supported Data Rates: 2x 425 Gbit/s
Up to 2 km via Singlemode OS2
Use ONLY with MTP/MPO-8/12 APC connectors
Specs
  • 8x 1311 nm
  • 2 km
  • 2x 425 G
  • MTP/MPO-8/12
Protocols
  • 100G ETH
  • 200G ETH
  • 400G ETH
  • 400G NDR
  • 800G ETH
  • 800G NDR (2xNDR)
Part number
O.134HG2.2
Availability
4-6 weeks after ordering
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor OSFP
Connector / Polish 2x MTP/MPO-8/12 APC
Interface Singlemode
Type 2x DR4+
Distance 2 km
Temperature Range 0°C - 70°C
Lane Count 8x (Tx/Rx)
Bandwidth 2x 425 Gbit/s
Bandwith Per Lane 106.25 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 16 W
CDR TX and RX
SGMII No
Inbuilt FEC Yes
Powerbudget (dB) 4 dB
Transmit min/max per lane -3.1 dBm / 4 dBm
Receiver min/max per lane -7.1 dBm / 4 dBm (overload)
Wavelength TX (Typical) 8x 1311 nm
Wavelength TX (Range) 106.3 - 1317.5 nm
Wavelength RX (Typical) 8x 1311 nm
Laser EML
Receiver Type PIN
Modulation PAM4
Transmit and Dispersion Penalty 3.4 dB
Extinction Ratio 3.5 dB
Supported Protocols 400G Infiniband NDR, 800G Ethernet, 800G Infiniband (2xNDR), 400G Ethernet, 200G Ethernet, 100G Ethernet

Configure Transceiver Using Your FLEXSOX

It's that easy to use
1. Slide-In
2. Insert A Transceiver
  • Insert a Universal Transceiver into the corresponding slot
3. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
4. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • Nvidia (ex. Mellanox) MMS4X00-NM compatible
Your vendor / compatibility is missing?

What customers say

The FLEXBOX was easy to set up and use, and the programmable transceivers worked seamlessly in several different brand devices. This will make our spares much easier to manage.
Shaun James Engineering Inspector, Tata Steel Strip Products UK
FLEXBOX allows us to reduce the amount of spare transceivers we keep for our diverse hardware systems, thereby keeping overall cost low.
Sven Gebhardt Head of Platforms & Services, grandcentrix GmbH
After many years of using clumsy EEPROM programmers, soldering irons, hammers etc. to make SFP modules work properly, now FLEXBOX allows me to do the same thing in a fraction of time. I only hope my boss doesn't find out I have so much free time now!
Adil Demiri CTO, SGN d.o.o.

We heard about FLEXOPTIX for the quality of its FLEXBOX and optics.
We were able to acquire a FLEXBOX to help out our customers. The quality of the product leaves us speechless. We are immediately going to change optics supplier to FLEXOPTIX. The quality is excellent.

Axel Hauguel CEO / Dyjix
More