100G QSFP28 BiDi LR with dual CDR 10 km, ᵀˣ1331 / ᴿˣ1271 nm, LC-Simplex, Singlemode
Universal QSFP28 BiDi Transceiver
Use FLEXBOX to configure to almost any vendor
Double your bandwith by using only one fiber for transmit and receive
For 100GBASE-LR Ethernet links
Integrated Clock-Data-Recovery (CDR)
PAM4 modulated signal
Supported Data Rates: 106.25 Gbit/s
Up to 10 km via Singlemode OS2
LC-Simplex Connector
Specs
- 1331 nm
- 10 km
- 106.25 G
- LC
Protocols
- 100G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | QSFP28 |
---|---|
Connector / Polish | LC-Simplex UPC |
Interface | Singlemode BiDi |
Compliance Code | BiDi LR |
Distance | 10 km |
Temperature Range | 0°C - 70°C |
Bandwidth | 106.25 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
Power Consumption | 4.5 W |
CDR | TX and RX |
---|---|
SGMII | No |
Inbuilt FEC | Yes, KP4 |
Powerbudget (dB) | 4.7 dB |
Transmit min/max per lane | -1.4 dBm / 4.5 dBm |
Receiver min/max per lane | -6.1 dBm / 4.5 dBm (overload) @100G |
Wavelength TX (Typical) | 1331 nm |
Wavelength TX (Range) | 1324.5 - 1337.5 nm |
Wavelength RX (Typical) | 1271 nm |
Wavelength RX (Range) | 1264.5 - 1277.5 nm |
---|---|
Laser | EML |
Receiver Type | PIN |
Modulation | PAM4 @100G |
Transmit and Dispersion Penalty | 3.4 dB |
Extinction Ratio | 3.5 dB |
Supported Protocols | 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Arista 3rd_Party QSFP-100G-LR4 compatible
- Cisco Systems QSFP-100G-FR-S compatible
- Cisco Systems QSFP-100G-LR4-S compatible
- Dell QSFP28-100G-LR4 compatible
- Fortinet FG-TRAN-QSFP28-LR4 compatible
- Huawei 10km_BiDi_LR4 compatible
- Juniper QSFP-100G-LR compatible
- Nokia (ex. Alcatel-Lucent) 3HE10550AA compatible
Your vendor / compatibility is missing?
What customers say
The FLEXBOX is really a great tool. It allows me to quickly re-configure transceivers. Nice additional feature is the "Power Meter & Source" tool. It allows, without additional hardware, a quick check of optical transceivers, fiber cables, fiber connections etc.
René Oskar Kühne
Retired scientist, now acting in the field of IT support, R.O. Kuehne
Everything is build for and runs in the cloud today, the Aviatrix Multicloud solution as well.
Still, we have customers asking for a highperformance encryption from “their” premises to the cloud and this is where our CloudN appliances come into play.
If customers ask us to support the installation of our appliances, we’ll do everything we can to help. And then it’s good to know that if you sneak into a datacenter, you can rely on FLEXOPTIX to even fulfil that connection(s) that are terminating on a device that was missing or has changed in the architecture you discussed before.
Thanks for the brilliant service!
Gerald Buchholz / Principal Solution Architect
Aviatrix
With the FLEXBOX we’re able to use our Transceivers universally in all kind of equipment and reduce the stock keeping significantly. Just awesome!
Christian Seitz
Head of Network, STRATO AG
Using FLEXBOX and FLEXOPTIX transceivers mean for us Flexibility. We don’t use so much transceivers but we work with different brands each day.
With a small amount in stock we can configure them with the right specifications for each use. Assuring it will perfectly fit the requirements of our equipments and costs are also reduced considerably.
Setting up either the FLEXBOX and a transceiver on a computer or through the mobile app is just easy as 1,2,3. It tooks us less than 15 minutes between unboxing and using a transceiver.
We really appreciate the mobile option so we can have the FLEXBOX in one hand, a transceiver in the other one and the phone with the app in the pocket for programming on the field.
Thanks FLEXOPTIX for this really useful tool and for extending supported vendors in the future.
Christophe Mulkers
CEO/CTO, Oufti Connections