100G QSFP28 4WDM-40 with dual CDR 40 km, λ1296-1309 nm, LC-Duplex, Singlemode

Universal QSFP28 Transceiver
Use FLEXBOX to configure to almost any vendor
For 100GBASE-4WDM-40 Ethernet links
Integrated Clock-Data-Recovery (CDR)
needs FEC in host to achieve 40km (40km for 100G Ethernet, 30km for OTU)
Supported Data Rates: 103.12 Gbit/s - 110.36 Gbit/s
Up to 40 km via Singlemode OS2
LC-Duplex Connector
Specs
  • int. Mux
  • 40 km
  • 110.36 G
  • LC
Protocols
  • 100G ETH
  • OTU4
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
Q.161HG.40.O.W:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

  • Matching Products

Higher Power Budget
100G QSFP28 ER4 with dual CDR 40 km, λ1296-1309 nm, LC-Duplex, Singlemode 
100G QSFP28 ER4 with dual CDR | 40 km, λ1296-1309 nm, LC-Duplex, Singlemode
34 pcs in stock 2,071.00 EUR
LC-Duplex to LC-Duplex Singlemode cable A1 9/125 µm, yellow, 0.25 m - 100 m 
LC-Duplex to LC-Duplex Singlemode cable | A1 9/125 µm, yellow, 0.25 m - 100 m
As low as 12.20 EUR
LWL Fibre Cleaner LC / Belt clip edition  
LWL Fibre Cleaner LC / Belt clip edition
29 pcs in stock 94.05 EUR

Specification

Form Factor QSFP28
Connector / Polish LC-Duplex PC
Interface Singlemode
Compliance Code 4WDM-40
Distance 40 km
Temperature Range 0°C - 70°C
Lane Count 4x (Tx/Rx)
Bandwidth 103.12 Gbit/s - 110.36 Gbit/s
Bandwith Per Lane 25.78 Gbit/s - 27.59 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 3.5 W
CDR TX and RX
SGMII No
Inbuilt FEC No
Powerbudget (dB) 21 dB
Transmit min/max per lane 0.5 dBm / 6.5 dBm
Receiver min/max per lane -20.5 dBm / -3.5 dBm (overload) @100G
Wavelength TX (Typical) 1295.6 nm, 1300 nm, 1304.6 nm, 1309.1 nm
Wavelength RX (Typical) 1295.6 nm, 1300 nm, 1304.6 nm, 1309.1 nm
Laser EML
Receiver Type APD
Modulation NRZ @100G
Transmit and Dispersion Penalty 2 dB
Extinction Ratio 4.5 dB
Supported Protocols 100G Ethernet, OTU4

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
Your vendor / compatibility is missing?

What customers say

FLEXBOX makes it easier than ever to manage your optics hardware! From unboxing to a configured module in a minute! Great product.
Otto Lodewijk Director, SuitIT
For years we struggled with hundreds of transceivers from different vendors but this is finally over! With FLEXBOX we can easily reconfigure our transceivers which in the end saves a lot of time and money.
Marcel Wösle Director Infrastructure Services, Avira Operations GmbH & Co.KG

I personally did not know FLEXOPTIX yet, but since I got in contact with it the first time, I do not want to miss it anymore. Very good product. I like the ability to program them to vendor specific SFPs which are recognized as they would be original ones. If the hardware behind changes I can simply change the SFPs to new vendor specific ones.

Thank you for such a great product.

Stefan Kirbes System Administrator / INTERCOM Austria GmbH
It's just a genius device. So easy to use and simple! I would recommend it to every network engineer. Plug-in the module, program and its ready for deployment!
David Schoefberger Schoefberger
More