100G QSFP28 DR with dual CDR 500 m, λ1311 nm, LC-Duplex, Singlemode
QSFP28
DR
Universal QSFP28 Transceiver
Use FLEXBOX to configure to almost any vendor
For 100GBASE-DR Ethernet links
Integrated Clock-Data-Recovery (CDR)
PAM4 modulated signal
Supported Data Rates: 106.25 Gbit/s
Up to 500 m via Singlemode OS2
LC-Duplex Connector
Specs
- 1311 nm
- 500 m
- 106.25 G
- LC
Protocols
- 100G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | QSFP28 |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | DR |
| Distance | 500 m |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 106.25 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 4.3 W |
| CDR | TX and RX |
|---|---|
| SGMII | No |
| Inbuilt FEC | Yes, KP4 |
| Powerbudget (dB) | 3 dB |
| Transmit min/max per lane | -2.9 dBm / 4 dBm |
| Receiver min/max per lane | -5.9 dBm / 4 dBm (overload) @100G |
| Wavelength TX (Typical) | 1311 nm |
| Wavelength TX (Range) | 1304.5 - 1317.5 nm |
| Wavelength RX (Typical) | 1311 nm |
| Wavelength RX (Range) | 1304.5 - 1317.5 nm |
|---|---|
| Laser | EML |
| Receiver Type | PIN |
| Modulation | PAM4 @100G |
| Transmit and Dispersion Penalty | 3.4 dB |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Arista 3rd_Party QSFP-100G-DR compatible
- Arista QSFP-100G-DR compatible
- Cisco Systems QSFP-100G-DR-S compatible
- Cisco Systems QSFP-100G-PSM4-S compatible
- Juniper QSFP-100G-DR compatible
- Nokia Networks 3HE15276AA compatible
- Nvidia (ex. Mellanox) MMS1V70-CM compatible
Your vendor / compatibility is missing?
What customers say
The FLEXBOX allows us to use 100MBit/s to multi-gigabit transceivers in our product for a wide range of customer needs. We can not solve them without this magic box!
Klaus Degner
Managing Director, Allegro Packets GmbH
FLEXBOX allows us to reduce the amount of spare transceivers we keep for our diverse hardware systems, thereby keeping overall cost low.
Sven Gebhardt
Head of Platforms & Services, grandcentrix GmbH
The flexbox has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!
We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.
The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.
The flexoptix universal transceivers are very easy to configure and we will be ordering these in the future.
Tim Waterham
ICT Infrastructure Engineer - Wyre Borough Council
Ordering and using FLEXOPTIX transceivers was far quicker than even getting a quote from traditional vendors.
Using the FLEXBOX is super easy and fast - 5 minutes to get transceivers ready including unboxing and enjoying packaged marshmallows.
Bronislav Robenek
Network Architect, Cloud4com