MTP® to 4x LC-Duplex Multimode OM5 Breakout cable 8 Cores, MPO compliant, 50/125 µm, lime, 0.5 m - 100 m

Fiber Optic Patch Cable, 0.5 m - 100 m
MTP® (female) UPC to 4x LC-Duplex UPC
MTP® connector complies to the MPO standard but ensures lower Insertion Loss
8 Cores for 40G (4x 10G) or 100G (4x 25G) applications
Multimode - Fiber grade ITU-T G.651.1
Specs
  • Multimode - OM5
  • 0.5m - 100m
  • 8 Cores
Part number
M5.T4L.x
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Cable Type Multimode
Cable Specification OM5 50/125
Length 100 m
Sheath Color lime
Cable Wiring straight
Cores 8 Cores for 4x 10G / 4x 25G
Side A - Connector MTP® (MPO compliant)
Side A - Polish female
Side A - Polish UPC
Side B - Connector LC-Duplex
Side B - Polish male
Side B - Polish UPC

What customers say

FLEXBOX allows us to reduce the amount of spare transceivers we keep for our diverse hardware systems, thereby keeping overall cost low.
Sven Gebhardt Head of Platforms & Services, grandcentrix GmbH
After many years of using clumsy EEPROM programmers, soldering irons, hammers etc. to make SFP modules work properly, now FLEXBOX allows me to do the same thing in a fraction of time. I only hope my boss doesn't find out I have so much free time now!
Adil Demiri CTO, SGN d.o.o.
We use “FLEXBOX” and “FLEXOPTIX” for a few years now. Since then life is much easier. And even saved me sometimes in the middle of the night. Need a special vendor or type, plug it in, program, and done. Very… but very occasionally a compatibility is not present in the system. Just drop a e-mail to support with your needs to get an immediate response from “JIRA – the flexoptix robot” and your compatibility is added to your FLEXBOX within 24 hours. Just awesome!!
Nick Derksen Infrastructure Engineer, Previder B.V
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore. The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that. As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
Thomas Verschuren Technical Consultant, IP Visie Networking B.V.
More