200G QSFP-DD 2x 4WDM-10 with dual CDR 10 km, λ1270-1330 nm, CS-Duplex, Singlemode
- int. Mux
- 10 km
- 2x 103.12 G
- CS
- 100G ETH
- 200G ETH
- 2x 100G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | QSFP-DD |
|---|---|
| Connector / Polish | 2x CS-Duplex UPC |
| Interface | Singlemode |
| Compliance Code | 2x 4WDM-10 |
| Operating Temperature | Standard |
| Distance | 10 km |
| Temperature Range | 0°C - 70°C |
| Lane Count | 8x (Tx/Rx) |
| Bandwidth | 2x 103.12 Gbit/s |
| Bandwidth Per Lane | 25.78 Gbit/s |
|---|---|
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 7 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 2.1 dB |
| Transmit min/max per lane | -6.5 dBm / 2.5 dBm |
| Receiver min/max per lane | -8.6 dBm / 2.5 dBm (overload) @100G |
| Wavelength TX (Typical) | 1270 nm, 1270 nm, 1290 nm, 1290 nm, 1310 nm, 1310 nm, 1330 nm, 1330 nm |
|---|---|
| Wavelength RX (Typical) | 1270 nm, 1270 nm, 1290 nm, 1290 nm, 1310 nm, 1310 nm, 1330 nm, 1330 nm |
| Laser | DFB |
| Receiver Type | PIN |
| Modulation | NRZ @100G |
| Transmit and Dispersion Penalty | 3 dB |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 2x 100G Ethernet, 200G Ethernet, 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
The FLEXBOX allows us to quickly configure our transceivers for every application. No more need to keep transceivers of every type and vendor in stock. Any problems with a transceiver configuration? Thanks to the lightning fast FLEXOPTIX Service Desk you’ll solve every issue as quick as possible.
The FLEXBOX was easy to set up and use, and the programmable transceivers worked seamlessly in several different brand devices. This will make our spares much easier to manage.
The FLEXBOX is really a great tool. It allows me to quickly re-configure transceivers. Nice additional feature is the "Power Meter & Source" tool. It allows, without additional hardware, a quick check of optical transceivers, fiber cables, fiber connections etc.
I had the chance to flash my first transceiver with the FLEXBOX and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the FLEXBOX. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my FLEXBOX for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.