800G QSFP-DD800 2x DR4+ with dual CDR 2 km, 8x λ1311 nm, MTP/MPO-8/12 APC, Singlemode
- 8x 1311 nm
- 2 km
- 2x 425 G
- MTP/MPO-8/12
- 100G ETH
- 2x 400G ETH
- 400G ETH
- 800G ETH
- 8x 100G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | QSFP-DD800 |
|---|---|
| Connector / Polish | 2x MTP/MPO-8/12 APC |
| Interface | Singlemode |
| Compliance Code | 2x DR4+ |
| Operating Temperature | Standard |
| Modulation | PAM4 |
| Distance | 2 km |
| Temperature Range | 0°C - 70°C |
| Lane Count | 8x (Tx/Rx) |
| Bandwidth | 2x 425 Gbit/s |
| Bandwidth Per Lane | 106.25 Gbit/s |
|---|---|
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 18 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | Yes, KP4 |
| Powerbudget (dB) | 1.4 dB |
| Transmit min/max per lane | -3.1 dBm / 4 dBm |
| Receiver min/max per lane | -4.5 dBm / 4 dBm (overload) @400G |
| Wavelength TX (Typical) | 8x 1311 nm |
| Wavelength TX (Range) | 1304.5 - 1317.5 nm |
|---|---|
| Wavelength RX (Typical) | 8x 1311 nm |
| Laser | EML |
| Receiver Type | PIN |
| Modulation | PAM4 @400G |
| Transmit and Dispersion Penalty | 3.4 dB |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 2x 400G Ethernet, 800G Ethernet, 8x 100G Ethernet, 400G Ethernet, 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Juniper QDD-2X400G-DR4 compatible
What customers say
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore.
The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that.
As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
Have been using FLEXOPTIX transceivers for a few years now in a carrier/telecoms environment for various vendors and they've never disappointed me. After having the opportunity to be able to program them myself on demand, I've realized how many hours I could have saved until now with FLEXBOX! No large stocks, just a few generic SFPs in stock waiting to get programmed when needed. Awesome!
FLEXBOX made my life a lot easier, adapting to multiple hardware in a breeze. I used fiber/SFP, RJ45/SFP, RJ45-10G/SFP for an esports production with different hardware brands and all of them worked instantly.
Before being a FLEXOPTER I had a lot of trouble communicating with my infrastructure and acquisitions team because of the complexity of compatibility between different brands and models
now I can operate and adapt to each on site production.
Definitely, FLEXOPTIX will be my optics supplier from today. The ability to compatibilize optics across multiple vendors is going to save us from many headaches. The FLEXBOX is a must for any company using optical network equipment.