800G QSFP-DD800 2x DR4++ with dual CDR 10 km, 8x λ1310 nm, MTP/MPO-8/12 APC, Singlemode
- 8x 1310 nm
- 10 km
- 2x 425 G
- MTP/MPO-8/12
- 100G ETH
- 2x 400G ETH
- 400G ETH
- 800G ETH
- 8x 100G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | QSFP-DD800 |
|---|---|
| Connector / Polish | 2x MTP/MPO-8/12 APC |
| Interface | Singlemode |
| Compliance Code | 2x DR4++ |
| Operating Temperature | Standard |
| Modulation | PAM4 |
| Distance | 10 km |
| Temperature Range | 0°C - 70°C |
| Lane Count | 8x (Tx/Rx) |
| Bandwidth | 2x 425 Gbit/s |
| Bandwidth Per Lane | 106.25 Gbit/s |
|---|---|
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 18 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 4.2 dB |
| Transmit min/max per lane | -1.9 dBm / 4.8 dBm |
| Receiver min/max per lane | -6.1 dBm / 4.8 dBm (overload) @400G |
| Wavelength TX (Typical) | 8x 1310 nm |
| Wavelength TX (Range) | 1304.5 - 1317.5 nm |
|---|---|
| Wavelength RX (Typical) | 8x 1310 nm |
| Laser | EML |
| Receiver Type | PIN |
| Modulation | PAM4 @400G |
| Transmit and Dispersion Penalty | 3.4 dB |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 2x 400G Ethernet, 800G Ethernet, 8x 100G Ethernet, 400G Ethernet, 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
Extensive list of supported vendors.
Your product is like a Swiss Army Knife that all Engineers should have!!
Great Job and keep it up!
Everything is build for and runs in the cloud today, the Aviatrix Multicloud solution as well.
Still, we have customers asking for a highperformance encryption from “their” premises to the cloud and this is where our CloudN appliances come into play.
If customers ask us to support the installation of our appliances, we’ll do everything we can to help. And then it’s good to know that if you sneak into a datacenter, you can rely on FLEXOPTIX to even fulfil that connection(s) that are terminating on a device that was missing or has changed in the architecture you discussed before.
Thanks for the brilliant service!
Ordering and using FLEXOPTIX transceivers was far quicker than even getting a quote from traditional vendors.
Using the FLEXBOX is super easy and fast - 5 minutes to get transceivers ready including unboxing and enjoying packaged marshmallows.
It's just a genius device. So easy to use and simple! I would recommend it to every network engineer. Plug-in the module, program and its ready for deployment!