100G CFP LR4 with dual CDR 10 km, λ1296-1309 nm, LC-Duplex, Singlemode

Universal CFP Transceiver
Use FLEXBOX to configure to almost any vendor
For 100GBASE-LR4 Ethernet links
Integrated Clock-Data-Recovery (CDR)
Supported Data Rates: 103.12 Gbit/s - 111.8 Gbit/s
Up to 10 km via Singlemode OS2
LC-Duplex Connector
Specs
  • int. Mux
  • 10 km
  • 111.8 G
Protocols
  • 100G ETH
  • OTU4
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Part number
C.161HG.10:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor CFP
Connector / Polish LC-Duplex PC
Interface Singlemode
Compliance Code LR4
Distance 10 km
Temperature Range 0°C - 70°C
Lane Count 4x (Tx/Rx)
Bandwidth 103.12 Gbit/s - 111.8 Gbit/s
Bandwith Per Lane 25.78 Gbit/s - 27.95 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 16 W
CDR TX and RX
SGMII No
Inbuilt FEC No
Powerbudget (dB) 4.3 dB
Transmit min/max per lane -4.3 dBm / 4.5 dBm
Receiver min/max per lane -8.6 dBm / 5.5 dBm (overload) @100G
Wavelength TX (Typical) 1295.56 nm, 1300.05 nm, 1304.58 nm, 1309.14 nm
Wavelength RX (Typical) 1295.56 nm, 1300.05 nm, 1304.58 nm, 1309.14 nm
Laser EML
Receiver Type PIN
Modulation NRZ @100G
Extinction Ratio 8 dB
Supported Protocols 100G Ethernet, OTU4

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • ADVA 1061700655-01 compatible
  • ADVA 1061700655-02 compatible
  • Brocade 100G-CFP-LR4-10KM compatible
  • Ciena (ex. Nortel) NTTA03BJE6 compatible
  • Cisco Systems CFP-100G-LR4 compatible
  • Huawei CFP-100G-LR4 compatible
  • Huawei OSN010001 compatible
  • Huawei OSN010N04 compatible
  • Infinera (ex. Transmode) TRX100260 compatible
  • Infinera (ex. Transmode) TRX100261 compatible
  • Juniper CFP-GEN2-100GBASE-LR4 compatible
  • Juniper SRX-CFP-100G-LR4 compatible
  • Keysight (ex. Ixia) CSM1310 compatible
  • MRV CFP-100GE-LR4 compatible
  • Net Insight NPA0118-LR04 compatible
  • Nokia (ex. Alcatel-Lucent) 3HE04821AB compatible
  • Packetlight CFP-LR4-1103 compatible
  • Ribbon (ex. ECI) OTR100_LR4 compatible
  • Ribbon (ex. ECI) OTR100_LR4DR compatible
Your vendor / compatibility is missing?

What customers say

Spending a few minutes of my time, first and foremost expressing how much I’m impressed by your friendliness, is the least I can do. Friendliness was followed by super-fast order processing and delivery. In a few words, unboxing and using your Flexbox is an utterly awesome experience. As in brilliant. Also saving us loads of time ordering optics. In addition to all of this – you deliver particular good build quality, too. You’ve got me impressed, thank you!
Mark van den Berg CTO - Icera Networks

I wanted to take a moment to provide some feedback regarding the on-site programming capabilities of your FLEXOPTIX product. I must say that being able to program SFPs on-site according to our specific requirements has been an incredibly valuable feature for our network infrastructure. The convenience and efficiency it offers have exceeded our expectations.

One of the standout benefits we have experienced is the rapid deployment it enables. Being able to respond quickly to changing network needs without having to wait for orders from different vendors has significantly reduced our deployment time. This has improved our operational efficiency and allowed us to be more agile in meeting our organization's evolving demands.

Moreover, the cost savings we have achieved through on-site programming have been remarkable. By eliminating the need to order pre-configured SFPs from various vendors, we have saved on shipping costs, streamlined our inventory management, and bypassed vendor-specific pricing structures. This flexibility has positively impacted our budgeting and overall equipment expenses.

This is simply a brilliant idea and product! Thank you!

Michal Szarecki IT Engineer/ pmitsolutions.ie

A must-have for every network engineer.
Never again will you have to stock different transceiver types for different vendors for the infrastructure you are using.
The setup of the FLEXBOX is very easy and self-explanatory. The configuration of the FLEXOPTIX universal transceivers is done in seconds and without any problems. Thanks to the smartphone app and the Mobility Pack, even on the go without having to lug around large equipment.

Ten out of ten, absolutely recommended!

Roman Beyerle CODESYS GmbH
The flashing is very quick and you can configure it to flash multiple devices in a row. Definitely well worth it.
Adam Montgomery Necto Inc
More