100G CFP2 LR4 with dual CDR 10 km, λ1296-1309 nm, LC-Duplex, Singlemode

Universal CFP2 Transceiver
Use FLEXBOX to configure to almost any vendor
For 100GBASE-LR4 Ethernet links
Integrated Clock-Data-Recovery (CDR)
Supported Data Rates: 103.12 Gbit/s - 111.8 Gbit/s
Up to 10 km via Singlemode OS2
LC-Duplex Connector
Specs
  • int. Mux
  • 10 km
  • 111.8 G
Protocols
  • 100G ETH
  • OTU4
Part number
C2.161HG.10
In stock
156 pcs

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor CFP2
Connector / Polish LC-Duplex PC
Interface Singlemode
Compliance Code LR4
Operating Temperature Standard
Modulation NRZ
Distance 10 km
Temperature Range 0°C - 70°C
Lane Count 4x (Tx/Rx)
Bandwidth 103.12 Gbit/s - 111.8 Gbit/s
Bandwidth Per Lane 25.78 Gbit/s - 27.95 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 6 W
CDR TX and RX
SGMII No
Inbuilt FEC No
Powerbudget (dB) 6.3 dB
Transmit min/max per lane -4.3 dBm / 4.5 dBm
Receiver min/max per lane -10.6 dBm / 4.5 dBm (overload) @100G
Wavelength TX (Typical) 1295.56 nm, 1300.05 nm, 1304.58 nm, 1309.14 nm
Wavelength RX (Typical) 1295.56 nm, 1300.05 nm, 1304.58 nm, 1309.14 nm
Laser EML
Receiver Type PIN
Modulation NRZ @100G
Transmit and Dispersion Penalty 1.5 dB
Extinction Ratio 4 dB
Supported Protocols 100G Ethernet, OTU4

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • Extreme 4050-00083-01 compatible
  • Huawei OSN010N09 compatible
  • Juniper CFP2-100GBASE-LR4 compatible
  • Nokia (ex. Alcatel-Lucent) 1AB426470001 compatible
  • Nokia (ex. Alcatel-Lucent) 3HE08217AA compatible
  • Ribbon (ex. ECI) OTR100P2_LR4 compatible
  • VSS monitoring CFP2 LR4 compatible
  • Brocade 100G-CFP2-LR4-10KM compatible
Your vendor / compatibility is missing?

What customers say

Definitely, FLEXOPTIX will be my optics supplier from today. The ability to compatibilize optics across multiple vendors is going to save us from many headaches. The FLEXBOX is a must for any company using optical network equipment.

Miguel Bérniz Chief Technical Officer / GibFibre Ltd

It's just a genius device. So easy to use and simple! I would recommend it to every network engineer. Plug-in the module, program and its ready for deployment!

David Schoefberger Staff Engineer Core IT Infrastructure/ New Work SE

After many years of using clumsy EEPROM programmers, soldering irons, hammers etc. to make SFP modules work properly, now FLEXBOX allows me to do the same thing in a fraction of time. I only hope my boss doesn't find out I have so much free time now!

Adil Demiri CTO / SGN d.o.o.

The FLEXBOX has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the FLEXBOX was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.

Looking forward to keep using the FLEXBOX in the future! :)

Stan van de Klippe Chief Executive Officer / RoyaleHosting B.V.
More