1G SFP BiDi SX Industrial 1,000 m, ᵀˣ1550 / ᴿˣ1310 nm, DDM, LC-Simplex, Multimode
- 1550 nm
- 1 km
- 1.25 G
- Industrial
- 1G ETH
- 1G FC
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Simplex UPC |
| Interface | Multimode BiDi |
| Compliance Code | BiDi SX |
| Distance | 1 km |
| Temperature Range | -40°C - 85°C |
| Bandwidth | 1.06 Gbit/s - 1.25 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 1 W |
|---|---|
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 11.5 dB |
| Transmit min/max per lane | -9.5 dBm / -3 dBm |
| Receiver min/max per lane | -21 dBm / -3 dBm (overload) @1G |
| Wavelength TX (Typical) | 1550 nm |
| Wavelength TX (Range) | 1500 - 1580 nm |
|---|---|
| Wavelength RX (Typical) | 1310 nm |
| Wavelength RX (Range) | 1260 - 1360 nm |
| Laser | FP |
| Receiver Type | PIN |
| Modulation | NRZ @1G |
| Extinction Ratio | 6 dB |
| Supported Protocols | 1G Fibre Channel, Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Alcatel-Lucent Ent. SFP-GIG-BX-D compatible
- Aruba Networks(ex. HP Network) J4858D compatible
- barox AC-SFP-BIB-SXE compatible
- Cisco Systems GLC-BX-D compatible
- Huawei SFP-GE-LX-SM1550-BIDI compatible
- kvm-tec KT-7009 compatible
- Moxa SFP-1G10BLC compatible
- Netgear AGM731F compatible
- Nokia (ex. Alcatel-Lucent) 1AB350870002 compatible
- Nokia (ex. Alcatel-Lucent) 3FE25772AB compatible
- Nokia (ex. Alcatel-Lucent) 3HE00868CB compatible
- Ubiquiti Networks UF-SM-1G-S YE compatible
What customers say
The flexbox has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!
We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.
The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.
The flexoptix universal transceivers are very easy to configure and we will be ordering these in the future.
We heard about FLEXOPTIX for the quality of its FLEXBOX and optics.
We were able to acquire a FLEXBOX to help out our customers. The quality of the product leaves us speechless. We are immediately going to change optics supplier to FLEXOPTIX. The quality is excellent.
FLEXBOX made my life a lot easier, adapting to multiple hardware in a breeze. I used fiber/SFP, RJ45/SFP, RJ45-10G/SFP for an esports production with different hardware brands and all of them worked instantly.
Before being a FLEXOPTER I had a lot of trouble communicating with my infrastructure and acquisitions team because of the complexity of compatibility between different brands and models
now I can operate and adapt to each on site production.