2.67G STM-16 SFP CWDM ~40 km / 17 dB, 1270 nm - 1610 nm, DDM, LC-Duplex
Universal SDH SFP Transceiver - CWDM
Use FLEXBOX to configure to almost any vendor
CWDM for multiple applications over one duplex fiber
Capable of operating in SDH / SONET networks
Supported Data Rates: 100 Mbit/s - 2.67 Gbit/s
Powerbudget of 17 dB for up to 40 km using an OS2 ITU-T G.652 fiber
Digital Diagnostic Monitoring (DDM)
Specs
- CWDM
- ~40 km / 17 dB
- 2.67 G
Protocols
- 100M ETH
- 1G ETH
- 1G FC
- 2G FC
- STM-1
- STM-16
- STM-4
-
Matching Products
-
Matching Products
Specification
Form Factor | SFP |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | CWDM |
Compliance Code | CWDM STM-16 |
Distance | 40 km |
Temperature Range | 0°C - 70°C |
Bandwidth | 100 Mbit/s - 2.67 Gbit/s |
Digital Diagnostic Management (DDM) | Internally Calibrated |
Power Consumption | 1 W |
---|---|
CDR | none |
Inbuilt FEC | No |
Powerbudget (dB) | 17 dB |
Transmit min/max per lane | -3 dBm / 2 dBm |
Receiver min/max per lane | -20 dBm / -3 dBm (overload) @2G |
Wavelength TX (Typical) | Channel R - 1610 nm |
Wavelength RX (Range) | 1260 - 1600 nm |
Laser | DFB |
---|---|
Receiver Type | PIN |
Modulation | NRZ @2G |
Transmit and Dispersion Penalty | 1 dB |
Extinction Ratio | 8.2 dB |
Supported Protocols | 1G Fibre Channel, 2G Fibre Channel, Fast Ethernet, Gigabit Ethernet, STM-1, STM-16, STM-4 |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADVA 0061704698 compatible
- Ciena (ex. Nortel) NTTP03EF compatible
- Cisco Systems CWDM-SFP-1610 compatible
- FibroLAN SF2G-LX3-5C-61 compatible
- Huawei SFP-GE-LH70-SM1610-CW compatible
- Infinera (ex. Transmode) TRX100014/61 compatible
- Marconi SU68AC compatible
- Marconi SU68CH compatible
- MRV SFP27DCWEIR-61R compatible
- Net Insight NPA0023-1610 compatible
- Nokia (ex. Alcatel-Lucent) 1AB196340016 compatible
- Nokia Siemens Networks V50017-U3361-K500 compatible
- Ribbon (ex. ECI) OTC25_PS61 compatible
- Transition Networks TN-SFP-OC48S-C61 compatible
Your vendor / compatibility is missing?
What customers say
Everything is build for and runs in the cloud today, the Aviatrix Multicloud solution as well.
Still, we have customers asking for a highperformance encryption from “their” premises to the cloud and this is where our CloudN appliances come into play.
If customers ask us to support the installation of our appliances, we’ll do everything we can to help. And then it’s good to know that if you sneak into a datacenter, you can rely on FLEXOPTIX to even fulfil that connection(s) that are terminating on a device that was missing or has changed in the architecture you discussed before.
Thanks for the brilliant service!
Gerald Buchholz / Principal Solution Architect
Aviatrix
I have received my orders from them in blistering speed. Happy to the nth degree.
Pat Cluney
Senior Technical Officer, Waterford Institute of Technology
In our test environment we use the optics over and over in many devices. Programming optics with the FLEXBOX is as easy as 1,2,3!
Erwin ter Hofstede
CEO, EC-Hosting
After many years of using clumsy EEPROM programmers, soldering irons, hammers etc. to make SFP modules work properly, now FLEXBOX allows me to do the same thing in a fraction of time. I only hope my boss doesn't find out I have so much free time now!
Adil Demiri
CTO, SGN d.o.o.