100G QSFP28 AOC with CDR (TX / RX) Multimode Fiber, 1 - 100 m
QSFP28 to QSFP28
AOC
Universal Active Optical Cable (AOC) with CDR (TX / RX), 1 - 100 m
Use FLEXBOX to configure to almost any vendor
QSFP28 to QSFP28
distances up to 3m can come with OM2+
Supported Datarate 103.12 Gbit/s
Modules are permanently attached to each end
Low power consumption < 7 W (less than 3.5 W per terminal)
Easy cable routing thanks to small diameter (Ø 2 mm) and bend radius
Connect different host systems by configuring each side individually
Specs
- Fiber
- 1m - 100m
- 103.12 G
- Active
Protocols
- 100G ETH
Specification
| Compliance Code | AOC |
|---|---|
| Form Factor | QSFP28 to QSFP28 |
| Interface | Active Optical Cable |
| Length | 100 m |
| Temperature Range | 0°C - 70°C |
|---|---|
| Bandwidth | 103.12 Gbit/s |
| Digital Diagnostic Management (DDM) | implemented |
| Power Consumption | 7 W (3.5 W + 3.5 W) |
| CDR | TX and RX |
|---|---|
| Modulation | NRZ |
| Supported Protocols | 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Edge Core ET7402-100AOC-100M compatible
- Extreme 10437 compatible
- Juniper JNP-100G-AOC-100M compatible
- Nokia (ex. Alcatel-Lucent) 3HE10551AA compatible
- Palo Alto Networks PAN-QSFP28-AOC-100M compatible
Your vendor / compatibility is missing?
What customers say
FLEXBOX allows us to reduce the amount of spare transceivers we keep for our diverse hardware systems, thereby keeping overall cost low.
Sven Gebhardt
Head of Platforms & Services, grandcentrix GmbH
It's just a genius device. So easy to use and simple! I would recommend it to every network engineer. Plug-in the module, program and its ready for deployment!
David Schoefberger
Schoefberger
With the FLEXBOX we’re able to use our Transceivers universally in all kind of equipment and reduce the stock keeping significantly. Just awesome!
Christian Seitz
Head of Network, STRATO AG
Using FLEXBOX and FLEXOPTIX transceivers mean for us Flexibility. We don’t use so much transceivers but we work with different brands each day.
With a small amount in stock we can configure them with the right specifications for each use. Assuring it will perfectly fit the requirements of our equipments and costs are also reduced considerably.
Setting up either the FLEXBOX and a transceiver on a computer or through the mobile app is just easy as 1,2,3. It tooks us less than 15 minutes between unboxing and using a transceiver.
We really appreciate the mobile option so we can have the FLEXBOX in one hand, a transceiver in the other one and the phone with the app in the pocket for programming on the field.
Thanks FLEXOPTIX for this really useful tool and for extending supported vendors in the future.
Christophe Mulkers
CEO/CTO, Oufti Connections