200G QSFP56 SR4 with dual CDR 100 m, 4x λ850 nm, MTP/MPO-8/12, Multimode
- 4x 850 nm
- 100 m
- 212.5 G
- MTP/MPO-8/12
- 200G ETH
- 200G HDR
-
Matching Products
-
Matching Products
Specification
Form Factor | QSFP56 |
---|---|
Connector / Polish | MTP/MPO-8/12 PC |
Interface | Multimode |
Compliance Code | SR4 |
Distance | 100 m |
Temperature Range | 0°C - 70°C |
Lane Count | 4x (Tx/Rx) |
Bandwidth | 212.5 Gbit/s |
Bandwith Per Lane | 53.13 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
---|---|
Power Consumption | 5 W |
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 1.9 dB |
Transmit min/max per lane | -6.5 dBm / 4 dBm |
Receiver min/max per lane | -8.4 dBm / 4 dBm (overload) @200G |
Wavelength TX (Typical) | 4x 850 nm |
Wavelength TX (Range) | 840 - 860 nm |
---|---|
Wavelength RX (Typical) | 4x 850 nm |
Laser | VCSEL |
Receiver Type | PIN |
Modulation | PAM4 @200G |
Transmit and Dispersion Penalty | 4.5 dB |
Extinction Ratio | 3 dB |
Supported Protocols | 200G Infiniband HDR, 200G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
What a great product! FLEXBOX is an incredible help to our organisation that has a zoo of vendors and manufacturers in our data center. It is super easy to use and we can rapidly get a transceiver ready for any of our hardware. Q: How to improve the experience of setting up transceivers in a multivendor environment? A: FLEXBOX.
The flexbox has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!
We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.
The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.
The flexoptix universal transceivers are very easy to configure and we will be ordering these in the future.