100G QSFP28, 100 GHz Grid - C-Band DWDM ZR with dual CDR and FEC 2 km / 8.5 dB, LC-Duplex
- DWDM 100 GHz
- 100 km
- 106.25 G
- Dual CDR
- 100G ETH
Specification
| Form Factor | QSFP28 |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | DWDM |
| Compliance Code | DWDM ZR |
| Distance | 100 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 106.25 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 4.5 W |
|---|---|
| CDR | TX and RX |
| Inbuilt FEC | Yes, KP4 |
| Powerbudget (dB) | 8.5 dB |
| Transmit min/max per lane | -0.5 dBm / 2 dBm |
| Receiver min/max per lane | -9 dBm / 4 dBm (overload) @100G |
| Wavelength TX (Typical) | Channel 60 - 1529.55 nm |
| Wavelength RX (Range) | 1526 - 1567 nm |
| Laser | DFB |
|---|---|
| Receiver Type | PIN |
| Modulation | PAM4 @100G |
| Transmit and Dispersion Penalty | 2 dB |
| Chromatic Dispersion Tolerance | 0 ps/nm to 30 ps/nm @100G |
| Extinction Ratio | 6 dB |
| Supported Protocols | 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
The flexbox has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!
We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.
The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.
The flexoptix universal transceivers are very easy to configure and we will be ordering these in the future.
The flexbox has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the flexbox was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.
Looking forward to keep using the flexbox in the future! :)
FLEXBOX made my life a lot easier, adapting to multiple hardware in a breeze. I used fiber/SFP, RJ45/SFP, RJ45-10G/SFP for an esports production with different hardware brands and all of them worked instantly.
Before being a FLEXOPTER I had a lot of trouble communicating with my infrastructure and acquisitions team because of the complexity of compatibility between different brands and models
now I can operate and adapt to each on site production.
FLEXBOX is not only awesome but also easy to use. One of the standout features of FLEXOPTIX is their compatibility with various vendors. Whether you're working with different hardware providers, you can rely on FLEXOPTIX to work seamlessly across different platforms.
Moreover, the support for FLEXBOX and FLEXOPTIX is exceptional. If you encounter any issues or have questions, you can rely on the support teams to provide timely and effective assistance. They are dedicated to ensuring that users have a smooth experience and can make the most of these technologies.