100G QSFP28 OTU4 ER4 with dual CDR 40 km, λ1296-1309 nm, LC-Duplex, Singlemode
- int. Mux
- 40 km
- 111.8 G
- LC
- 100G ETH
- OTU4
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | QSFP28 |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | Singlemode |
Compliance Code | ER4 |
Distance | 40 km |
Temperature Range | 0°C - 70°C |
Lane Count | 4x (Tx/Rx) |
Bandwidth | 103.12 Gbit/s - 111.8 Gbit/s |
Bandwith Per Lane | 25.78 Gbit/s - 27.95 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
---|---|
Power Consumption | 5.5 W |
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 18 dB |
Transmit min/max per lane | -2.9 dBm / 2.9 dBm |
Receiver min/max per lane | -20.9 dBm / -3.5 dBm (overload) @100G |
Wavelength TX (Typical) | 1295.6 nm, 1300 nm, 1304.6 nm, 1309.1 nm |
Wavelength RX (Typical) | 1295.6 nm, 1300 nm, 1304.6 nm, 1309.1 nm |
---|---|
Laser | EML |
Receiver Type | SOA + PIN |
Modulation | NRZ @100G |
Transmit and Dispersion Penalty | 2.5 dB |
Extinction Ratio | 8 dB |
Supported Protocols | 100G Ethernet, OTU4 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Cisco Systems QSFP-100G-ER4L-S compatible
- Nokia (ex. Alcatel-Lucent) 1AB474800035 compatible
What customers say
The flexbox has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!
We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.
The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.
The flexoptix universal transceivers are very easy to configure and we will be ordering these in the future.
As a network engineer responsible for programming universal transceivers, I can confidently say that the FLEXBOX is a true game-changer in the field. Its unparalleled capabilities and user-friendly interface makes the process effortless and highly efficient.
One of the standout features of the FLEXBOX is its ability to support a wide range of transceiver types and brands. Whether you're dealing with SFP, SFP+, QSFP, the FLEXBOX has got you covered.