10G SFP+ BiDi ZR Industrial 60 km, ᵀˣ1270 / ᴿˣ1330 nm, LC-Simplex, Singlemode
- 1270 nm
- 60 km
- 11 G
- Industrial
- 10G ETH
- 10G FC
- 1G ETH
- 1G FC
- 8G FC
- CPRI
- OBSAI
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | SFP+ |
---|---|
Connector / Polish | LC-Simplex UPC |
Interface | Singlemode BiDi |
Compliance Code | BiDi ZR |
Distance | 60 km |
Temperature Range | -40°C - 85°C |
Bandwidth | 614 Mbit/s - 11 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
Power Consumption | 1.5 W |
CDR | none |
---|---|
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 21 dB |
Transmit min/max per lane | 1 dBm / 6 dBm |
Receiver min/max per lane | -20 dBm / -6 dBm (overload) @10G |
Wavelength TX (Typical) | 1270 nm |
Wavelength TX (Range) | 1260 - 1280 nm |
Wavelength RX (Typical) | 1330 nm |
Wavelength RX (Range) | 1320 - 1340 nm |
---|---|
Laser | DFB |
Receiver Type | APD |
Modulation | NRZ @10G |
Transmit and Dispersion Penalty | 2 dB |
Extinction Ratio | 3.5 dB |
Supported Protocols | 10G Ethernet, 10G FC, 1G Fibre Channel, 8G Fibre Channel, Gigabit Ethernet, LTE 0.614G CPRI, LTE 0.768G OBSAI, LTE 1.22G CPRI, LTE 1.536G OBSAI, LTE 2.458G CPRI, LTE 3.072G OBSAI, LTE 4.915G CPRI, LTE 6.144G CPRI, LTE 6.144G OBSAI, LTE 7.373G CPRI, LTE 9.830G CPRI |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADVA 1061702595-02 compatible
- Cisco Systems SFP-10G-BXU-I compatible
- Juniper SFP-10GE-ZR compatible
- Nokia (ex. Alcatel-Lucent) 3FE55743AA compatible
What customers say
I had the chance to flash my first transceiver with the flexbox and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the Flexbox. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my flexbox for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.