50G SFP56 SR with dual CDR 100 m, λ850 nm, LC-Duplex, Multimode
SFP56
SR
Universal SFP56 Transceiver
Use FLEXBOX to configure to almost any vendor
For 50GBASE-SR Ethernet links
Integrated Clock-Data-Recovery (CDR)
PAM4 modulated signal
Supported Data Rates: 53.13 Gbit/s
Up to 100 m via Multimode OM4
LC-Duplex Connector
Specs
- 850 nm
- 100 m
- 53.13 G
Protocols
- 50G ETH
Specification
| Form Factor | SFP56 |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Multimode |
| Compliance Code | SR |
| Distance | 100 m |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 53.13 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 2.5 W |
| CDR | TX and RX |
|---|---|
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 3.9 dB |
| Transmit min/max per lane | -4.5 dBm / 3 dBm |
| Receiver min/max per lane | -8.4 dBm / 4 dBm (overload) @50G |
| Wavelength TX (Typical) | 850 nm |
| Wavelength TX (Range) | 840 - 860 nm |
| Wavelength RX (Typical) | 850 nm |
| Wavelength RX (Range) | 840 - 860 nm |
|---|---|
| Laser | VCSEL |
| Receiver Type | IDP |
| Modulation | PAM4 @50G |
| Transmit and Dispersion Penalty | 4.5 dB |
| Extinction Ratio | 3 dB |
| Supported Protocols | 50G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
Your vendor / compatibility is missing?
What customers say
We are realy happy with the FLEXBOX, programming FLEXOPTIX universal transceivers works like a charm.
Just insert, detect, select and start programming, now we are able to support hundreds off vendors with just a few standard SFP modules.
Amazing smart solution!
Stefan van Merriënboer
Senior ICT Consultant / Effisol
The FLEXBOX is really a great tool. It allows me to quickly re-configure transceivers. Nice additional feature is the "Power Meter & Source" tool. It allows, without additional hardware, a quick check of optical transceivers, fiber cables, fiber connections etc.
René Oskar Kühne
Retired scientist, now acting in the field of IT support, R.O. Kuehne
The SFP are exactly like promise on the web page, and the configuration tool is so amazing. I worked years with SFP and optical fiber and this tool is so great. It include a power meter an OTDR and allow to diagnose and configure the SFP for many vendors. It will help us in our research and also to manage our LAN.
Thank you FLEXOPTIX
Sylvain Brisebois
Advance Research, Senior Firmware Engineer, KINOVA
Before we knew FLEXOPTIX, we always stocked various types of transceivers from different brands. Now, several years later, we have completely switched to FLEXOPTIX's universal transceivers since we can simply brand these ourselves using the FLEXBOX. Along with their broad product range and very fast shipping, they are an awesome company to deal with!
Jeffrey Bosma
XS News , Sr. System & Network Engineer