6G Video SDI SFP+ 10 km, λ1310 nm, LC-Duplex, Singlemode
SFP+
6G SDI
Universal Video SFP+ Transceiver
Use FLEXBOX to configure to almost any vendor
3G SDI protocol support for broadcasting applications
Supported Data Rates: 270 Mbit/s - 5.94 Gbit/s
Up to 10 km via Singlemode OS2
LC-Duplex Connector
Specs
- 1310 nm
- 10 km
- 5.94 G
- Video
Protocols
- 6G SDI
Specification
| Form Factor | SFP+ |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | 6G SDI |
| Distance | 10 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 270 Mbit/s - 5.94 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 1.2 W |
|---|---|
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 5.8 dB |
| Transmit min/max per lane | -8.2 dBm / 2 dBm |
| Receiver min/max per lane | -14 dBm / 0.5 dBm (overload) @6G |
| Wavelength TX (Typical) | 1310 nm |
| Wavelength TX (Range) | 1260 - 1355 nm |
|---|---|
| Wavelength RX (Typical) | 1310 nm |
| Wavelength RX (Range) | 1260 - 1620 nm |
| Laser | DFB |
| Receiver Type | PIN |
| Modulation | NRZ @6G |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 6G SDI |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
Your vendor / compatibility is missing?
What customers say
Extensive list of supported vendors.
Your product is like a Swiss Army Knife that all Engineers should have!!
Great Job and keep it up!
Fahad Dalwai
Network Engineer, Abdulaziz Abdulmohsin Al-Rashed Sons Co. W.L.L.
Working with a lot of different vendor and devices, it is always a problem to find the compatible transceiver from different distributors and especially to ensure that it is really compatible. I have found FLEXOPTIX, and the FLEXBOX and I must say that this is awesome! We can now simply buy generic transceivers and program them with the FLEXBOX and the FLEXOPTIX App. The application is fantastic and very easy to use! This makes us save a lot of time and no more concern about the compatibility.
Christian Brasolin
Senior System Engineer / Netica SRL
On more than one occasion the flexbox significantly saved time for me by not having to scrub a deployment session but simply reconfigure a transceiver and carry on. This alone is a good reason that secures the flexbox a non-negotiable place in my datacenter-go-bag. However what really sets flexoptix apart is not them solving an irritating problem we all know. No. It is their vast inventory and know-how paired with impeccable QA. If I have a need for transceivers it is my single go-to source for procurement. They have exactly what I need in stock even before I know I need it, and when I need it, I can trust the order is in my hands in no time. Every single time. I can configure and deploy without doubt and without delay. It is rare to find such a valuable and dependable partner that reliably takes away a whole set of problems while offering decent pricing and a customer support that is above reproach.
Michael Horn
Telecommunications Infrastructure Security Professional
It's just a genius device. So easy to use and simple! I would recommend it to every network engineer. Plug-in the module, program and its ready for deployment!
David Schoefberger
Schoefberger