10G SFP+ Auto-Tunable DWDM ZR 80 km, 48 Channels, 100GHz Grid, C-Band, LC-Duplex, Singlemode
- DWDM 100GHz
- 80 km
- 11.3 G
- Auto-Tunable
- 10G ETH
Specification
| Form Factor | SFP+ |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode DWDM 100GHz |
| Compliance Code | ZR |
| Distance | 80 km |
| Temperature Range | -40°C - 85°C |
| Bandwidth | 9.83 Gbit/s - 11.3 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 2.5 W |
| CDR | none |
|---|---|
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 23 dB |
| Transmit min/max per lane | -1 dBm / 3 dBm |
| Receiver min/max per lane | -24 dBm / -7 dBm (overload) @10G |
| Wavelength TX (Typical) | tunable DWDM 100GHz |
| TX Tunable Range | 1528.77 - 1566.31 nm |
| Wavelength RX (Range) | 1525 - 1575 nm |
| Laser | ILMZ |
|---|---|
| Receiver Type | APD |
| Modulation | NRZ @10G |
| Transmit and Dispersion Penalty | 3 dB |
| Chromatic Dispersion Tolerance | -300 ps/nm to 1,400 ps/nm @10G |
| Extinction Ratio | 8.2 dB |
| Supported Protocols | 10G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Edge Core ET5402-LR compatible
What customers say
We heard about FLEXOPTIX for the quality of its FLEXBOX and optics.
We were able to acquire a FLEXBOX to help out our customers. The quality of the product leaves us speechless. We are immediately going to change optics supplier to FLEXOPTIX. The quality is excellent.
I have my own company, and I work as a network consultant for different customers, especially in the wind turbine business. I am often on turbine sites in the middle of the ocean, where I need a SFP of a certain type/vendor. By using the FLEXOPTIX FLEXBOX, I have solved a very big issue, just by having this tool and some FLEXOPTIX SFP`s in my bag. Then I can solve the issue, and get the site up and running immediately. This saves another trip to site (often by helicopter), and a lot of money and time. I am very exited about this product, and will certainly recommend this product to everybody.