Tunable DWDM SFP+ with Auto-Tune

Introduction

Intelligent operation automatically enables scan and tune to same λ on both ends. Simplifies deployment, removes the need for a tuning box and reduced field technician support. Reduces  needto carry inventory for multiple wavelength part codes.

Functionality

  1. When T‐SFP+ modules are inserted into the corresponding electrical ports,
    (1) central office and
    (2) remote site, both modules automatically start the automatic tuning process
  2. The process ensures that the T‐SFP+ modules tune to the channel determined by the  DWDM filter (Mux/Demux) to which both modules are connected
  3. After completion of the automatic tuning process, both modules fix their wavelengths and move into normal operation
  4. The modules shall appear as regular tunable products to the host system once Auto‐Tune is completed.
  5. “Auto‐tune” can be use without special host software on either the BBU or RRU sides of the network
 

Related Products

1 comments

Christian Svensson Christian Svensson September 26, 2023 at 15:40

Can I use auto-tune on one side and fixed lambda on the other side? Or will both side need auto-tune in order to correctly find the correct lambda to operate on?

Reply

Replies

Oliver Kolb - FLEXOPTIX Oliver Kolb - FLEXOPTIX October 13, 2023 at 12:20

Hi Christian,
Please excuse the late reply. I assume you would like to use a fixed DWDM transceiver you have already in use in your infrastructure.
This special autotune transceiver just works as a pair. So in this case, unfortunately, the answer would be a „No“.
Best regards,
Oli

Reply

Only registered users can post comments. Please Sign in or create an account