25G SFP28 CWDM LR with dual CDR Industrial ~10 km / 12 dB, 1270 nm - 1370 nm, LC-Duplex
- CWDM
- ~10 km / 12 dB
- 25.78 G
- Dual CDR
- 25G ETH
Specification
| Form Factor | SFP28 |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | CWDM |
| Compliance Code | CWDM LR |
| Distance | 10 km |
| Temperature Range | -40°C - 85°C |
| Bandwidth | 25.78 Gbit/s |
| Digital Diagnostic Management (DDM) | Internally Calibrated |
|---|---|
| Power Consumption | 2 W |
| CDR | TX and RX |
| Inbuilt FEC | No |
| Powerbudget (dB) | 12 dB |
| Transmit min/max per lane | 0 dBm / 6 dBm |
| Receiver min/max per lane | -12 dBm / 2 dBm (overload) @25G |
| Wavelength TX (Typical) | Channel F - 1370 nm |
|---|---|
| Wavelength RX (Range) | 1260 - 1380 nm |
| Laser | DFB |
| Receiver Type | PIN |
| Modulation | NRZ @25G |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 25G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Cisco Systems SFP-25G-LR-S compatible
- Nokia Siemens Networks AOSD 474902A.101 compatible
What customers say
A must-have for every network engineer.
Never again will you have to stock different transceiver types for different vendors for the infrastructure you are using.
The setup of the FLEXBOX is very easy and self-explanatory. The configuration of the FLEXOPTIX universal transceivers is done in seconds and without any problems. Thanks to the smartphone app and the Mobility Pack, even on the go without having to lug around large equipment.
Ten out of ten, absolutely recommended!
First of all, I must salute the both geniously clever and absolutely gorgeous packaging: frankly, my I.T. colleague and I had blinking stars in the eyes when opening the boxes. I had a previous experience with both proprietary and generic transceivers/DAC, and I must admit that your hardware is doing great, everything feels very professional, and thanks to the FLEXBOX, the configuration is super-easy, install the app, insert the transceiver, select model, et voilà! The switches are happy. Thanks for the candy!