10G XFP LR Industrial with dual CDR 10 km, λ1310 nm, LC-Duplex, Singlemode
- 1310 nm
- 10 km
- 11.1 G
- Industrial
- 10G ETH
- 10G FC
- 8G FC
- OTU2
- STM-64
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | XFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | LR |
| Distance | 10 km |
| Temperature Range | -40°C - 85°C |
| Bandwidth | 8.5 Gbit/s - 11.1 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 3.5 W |
|---|---|
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 8 dB |
| Transmit min/max per lane | -6 dBm / -1 dBm |
| Receiver min/max per lane | -14 dBm / 0.5 dBm (overload) @10G |
| Wavelength TX (Typical) | 1310 nm |
| Wavelength TX (Range) | 1290 - 1330 nm |
|---|---|
| Wavelength RX (Typical) | 1310 nm |
| Wavelength RX (Range) | 1270 - 1600 nm |
| Laser | DFB |
| Receiver Type | PIN |
| Modulation | NRZ @10G |
| Extinction Ratio | 6 dB |
| Supported Protocols | 10G Ethernet, 10G FC, 8G Fibre Channel, OTU2, STM-64 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADTRAN 1442910G1C compatible
- ADTRAN 1442911F1 compatible
- ADVA 1061701841-01 compatible
- Allied Telesis # 13290 compatible
- Avaya (ex. Nortel) # 13291 compatible
- Calix 100-01508 compatible
- Ciena XCVR-A10V31 compatible
- Cisco Systems XFP-10GLR-OC192SR compatible
- Dell (ex. Force10) # 13296 compatible
- Extreme # 13295 compatible
- Extreme (ex. Enterasys) # 13294 compatible
- Fujitsu FIM31122/110 compatible
- H3C (ex. 3COM) # 13287 compatible
- Hirschmann # 13297 compatible
- Hitachi # 13298 compatible
- HP H3C # 13299 compatible
- Huawei XFP-STM64-LX-SM1310 compatible
- Infinera (ex. Transmode) # 13309 compatible
- Juniper (ex BTI Systems) # 13292 compatible
- Juniper XFP-10G-L-OC192-SR1 compatible
- LevelOne # 13302 compatible
- MikroTik # 13303 compatible
- Moxa # 13304 compatible
- MRV # 13305 compatible
- Nokia (ex. Alcatel-Lucent) 1AB375380009 compatible
- Nokia (ex. Alcatel-Lucent) 3FE50712BB compatible
- Nokia Siemens Networks V50017-U770-K500 compatible
- Nokia-Siemens (ex. Atrica) AT10101 compatible
- Packetlight SL101 compatible
- Palo Alto Networks # 13307 compatible
- RAD XFP-1DH compatible
- Radware # 13308 compatible
- Ribbon (ex. ECI) OTR64I_PI3 compatible
- Telco Systems BTI-10GLR-T-DD-XFP compatible
- Transition Networks TN-XFP-LR1-T compatible
What customers say
Working with a lot of different vendor and devices, it is always a problem to find the compatible transceiver from different distributors and especially to ensure that it is really compatible. I have found FLEXOPTIX, and the FLEXBOX and I must say that this is awesome! We can now simply buy generic transceivers and program them with the FLEXBOX and the FLEXOPTIX App. The application is fantastic and very easy to use! This makes us save a lot of time and no more concern about the compatibility.
A must-have for every network engineer.
Never again will you have to stock different transceiver types for different vendors for the infrastructure you are using.
The setup of the FLEXBOX is very easy and self-explanatory. The configuration of the FLEXOPTIX universal transceivers is done in seconds and without any problems. Thanks to the smartphone app and the Mobility Pack, even on the go without having to lug around large equipment.
Ten out of ten, absolutely recommended!
I wanted to take a moment to provide some feedback regarding the on-site programming capabilities of your FLEXOPTIX product. I must say that being able to program SFPs on-site according to our specific requirements has been an incredibly valuable feature for our network infrastructure. The convenience and efficiency it offers have exceeded our expectations.
One of the standout benefits we have experienced is the rapid deployment it enables. Being able to respond quickly to changing network needs without having to wait for orders from different vendors has significantly reduced our deployment time. This has improved our operational efficiency and allowed us to be more agile in meeting our organization's evolving demands.
Moreover, the cost savings we have achieved through on-site programming have been remarkable. By eliminating the need to order pre-configured SFPs from various vendors, we have saved on shipping costs, streamlined our inventory management, and bypassed vendor-specific pricing structures. This flexibility has positively impacted our budgeting and overall equipment expenses.
This is simply a brilliant idea and product! Thank you!
We heard about FLEXOPTIX for the quality of its FLEXBOX and optics.
We were able to acquire a FLEXBOX to help out our customers. The quality of the product leaves us speechless. We are immediately going to change optics supplier to FLEXOPTIX. The quality is excellent.